Setting up date and time
The Clock setup allows you to set the meter’s date
and time.
-
Press and hold the Up and Down buttons simultaneously for 2 seconds to enter Setup.
-
Enter password. Default password is 0000.
-
Press OK.
-
Press the Down button to select year, date, and hour parameter.
-
Press OK.
-
Press Down button to change the digits.
NOTE: Hold the Down button for 2 seconds to move the cursor to the next digit. -
Press OK.
-
Press and hold the Up and Down buttons simultaneously for 2 seconds to exit Setup.
-
Select Yes to save your settings.
NOTE: You must always set or sync the meter time to local time.
Clock setup parameters
| Parameter | Values | Description |
|---|---|---|
| Year | YYYY | Set the current year using format displayed on screen. |
| Date | MM:DD | Set the current date using the format displayed on screen, where date is in MM (month) and DD (date) format. |
| Hour | HH:MM | Use the 24 hours format to set the current time in local time, where the time is in HH (hour) and MM (minutes) format. |