Iconic Connected Dimmer – Device user guide PDF
DUG_Iconic Connected Dimmer_PDL-00

Iconic Connected Dimmer


PDL354PBDMBTW-VW, PDL354PBDMBTZ-VW

  1. For your safety
  2. About the device
    The Iconic Connected Dimmer (hereinafter referred to as Dimmer) is a push-button device that can be used to switch and dim LED, ohmic, inductive or capacitive loads manually or remotely. It can detect the load automatically and provides thermal protection, overload-resistance and short-circuit protection.
  3. Installing the device
    Refer to the installation instruction supplied with this product.
  4. Changing device protocol
    The communication protocol of the device can be changed from Zigbee to Bluetooth and Bluetooth to Zigbee.
  5. Pairing the device
    Using the Wiser app, pair your device with the Wiser Hub to access and control the device. You can either add the device manually or do an auto-scan to pair it.
  6. Switching/Dimming the device manually
    You can turn on/off and increase/decrease the brightness of the dimmer manually. The dimmer will provide power to the load connected to it.
  7. Configuring the device
  8. Zigbee Mode
  9. Bluetooth Mode
  10. Resetting the device manually
    You can reset the device to factory default manually.
  11. LED Indication
  12. Troubleshooting
  13. Technical Data
Feedback
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.
Contact Information
Legal Information
Privacy Policy
Change your cookie settings