Using Function Blocks for Developing Application
|
Step |
Action |
|---|---|
|
1 |
In Project Browser window, click Programs >Tasks > MAST > Logic.  |
|
2 |
Right-click on the Logic folder and select New Section. Result: The New Section window is displayed on the screen. |
|
3 |
Enter a new name to the function block. Select language FBD and click OK. Result: The configuration zone window is displayed on the screen.  |
|
4 |
Right-click on the configuration zone and select FFB Input Assistant. Result: Function Input Assistant window is displayed on the screen.  |
|
5 |
Click the Browse button located next to Function Input Assistant screen. Result: FFB Type Selection window is displayed on the screen.  |
|
6 |
On FFB Type Selection screen, select <Libset V15.0> > TeSys island Library 2021 and then select the required function block and click OK.  |
|
7 |
After selecting the function block, click OK on the Function Input Assistant screen. Result: An icon appears near the arrow of the mouse.  |
|
8 |
Left-click on the configuration zone. Result: The structural view of the function block is displayed on the screen.  |
For more information on the available functional blocks and its configuration, refer to the EcoStruxure Control Expert – TeSys island Library Control – User Guide.