Wiser wireless shutter control for build in (Puck)

The Wiser wireless shutter control for build in (hereinafter referred to as Puck) provides the smart shutter functionalities with ordinary mechanical double push-button switches. The shutter Puck can be controlled directly from a wired-connected double push-button switch or wireless via the Wiser app.
Relay contacts are mechanically locked against each other to prevent simultaneous triggering of the two relay outputs.

Refer to the installation instruction supplied with this product.

Before using the Puck, manually test the Puck and make sure that it works when connected to the shutter.

Using the Wiser app, first pair your device with the Gateway/Hub to access and control the device. You can either add the device manually or do an auto-scan to pair it.

Using the Wiser app, you can remove a device from the device list.

You can reset the device to factory default manually.