Prepare the Battery Breaker Box for Cables
 DANGER |
|---|
|
Hazard of electric shock, explosion, or arc flash
Do not drill or punch holes for cables or grommets with
the gland plates installed, and do not drill or punch holes in close
proximity to the UPS.
Failure to follow these instructions will result in death or serious injury.
|
- Remove the gland plates:
- For bottom cable entry: Remove the bottom gland plate.
- For top cable entry – only available for the 20–80 kW battery breaker box: Remove the top gland plate.
20–80 kW Battery Breaker Box Top Cable Entry
20–80 kW Battery Breaker Box Bottom Cable Entry
100–200 kW Battery Breaker Box Bottom Cable Entry
- Drill or punch holes for cables or grommets in the gland plate(s).
- Install grommets (if applicable) and refit the gland plate(s). DANGERhazard of electric shock, explosion, or arc flashEnsure that there are no sharp edges that can damage the cables.Failure to follow these instructions will result in death or serious injury.
20–80 kW Battery Breaker Box Top Cable Entry
20–80 kW Battery Breaker Box Bottom Cable Entry
100–200 kW Battery Breaker Box Bottom Cable Entry
