LED Indications
Pairing the device
|
Status |
User Interaction |
Description |
|
Pairing in progress |
 |
The thermostat matrix display flashes "Jn" to indicate joining is initiated when the thermostat + and – touch button simultaneously and held for > 3 s. |
|
Successful joining network |
 |
The thermostat matrix display flashes a green |
|
Fails to join the network |
 |
The thermostat matrix display flashes a red |
Presetting the device
|
Status |
User Interaction |
Description |
|
Enter preset selection |
 |
The thermostat matrix display flashes "P1" when the thermostat is first powered on or after a factory reset to indicate preset “P1" is selected. |
|
Modify preset selection |
 |
The thermostat matrix display flashes "P2" or "P3" when the thermostat touch button is pressed. Note: When + touch button is pressed, the preset increases by one; similarly, the preset decreases by one when – touch button is pressed. For more information, refer to the section Presetting the device. |
Resetting the device
|
Status |
User Interaction |
Description |
|
Soft reset |
 |
"Sr" flashes on thermostat LED matrix during soft rest process. For more information, refer to the section resetting the device. |
|
Factory reset |
 |
"Fr" flashes on thermostat LED matrix during factory rest process. For more information, refer to the section resetting the device. |
Showing demand - temperature control modes
|
Status |
User Interaction |
Description |
|
Heating demand |
 |
The matrix display a solid red LED to indicate the thermostat is heating when the setpoint is higher than the current room temperature. NOTE: Heating
input has been activated.
|
|
Cooling demand |
 |
The matrix display a solid blue LED to indicate the thermostat is cooling when the setpoint is lower than the current room temperature. NOTE: Cooling input has
been activated.
|
Away mode
|
Status |
User Interaction |
Description |
|
Away mode is set in Wiser Home app. |
 |
A dot-matrix display glows, indicates that the thermostat
is in away mode. |
Temperature display
|
Status |
User Interaction |
Description |
|
Temperature below minimum display
value |
 |
Note: The thermostat matrix displays temperature limits -9 °C to 99 °C. The thermostat matrix display flashes “--” When the temperature is below -9 degrees. OR The thermostat matrix display flashes “--” when the thermostat cannot determine the temperature due to an error. |
|
Temperature above maximum display value |
 |
Note: The thermostat matrix displays temperature limits -9 °C to 99 °C. The thermostat matrix display flashes “+ +” when the temperature is above 99 degrees. |