System M and System D - Connected Thermostat 2 A, ZB

The SysM - Connected Thermostat, ZB (hereinafter referred to as thermostat) is mainly used for water-based heating and cooling applications, such as water-based underfloor heating and radiator heating.

You can preset the thermostat on the first power-on or immediately after a factory reset. The thermostat will require the selection of a preset to pre-configure settings depending on what the thermostat is directly controlling, which allows the thermostat to function correctly for the intended use case. Preset selection is a manual process and all preset uses a PI control algorithm which provides highly stable results.

Using the Wiser Home app, you can pair your thermostat with the Wiser Hub to access and control the thermostat.

Using the Wiser Home app, you can remove the thermostat from the Wiser system.

You can manually reset the thermostat to factory settings or soft reset.