Wiser 2 Channel Dimmer Controller (Wiser) – Device user guide PDF
DUG_ 2 Channel Dimmer Controller-00

Wiser 2 Channel Dimmer Controller


IH12000020
  1. For your safety
  2. About the device
    Wiser 2 Channel Dimmer Controller is a miniature micro module (hereinafter referred to as Puck), which is remotely controlled and designed to operate in AC mains. In AC mains, it operates with a common neutral lead. Two bell switches enable ON/OFF and dimming control of regular loads. It can be used to control different types of analog/digital dimmable lights. The device also operates as a repeater within the Z-Wave network to which it is associated and uses the latest Z-Wave plus chips. Typical regular dimmer loads (2D) are: light sources and other dimmable utility appliances.
  3. Installing the device
    Refer to the installation instruction supplied with this product.
  4. Pairing the device with the Wiser Hub
    Using the Wiser app, you can pair your 2 channel dimmer puck with the Wiser Hub to access and control the dimmer.
  5. Configuring the device
    Using the Wiser app, you can configure the device according to your preference.
  6. Using the device
    The Device Control Screen allows you to Switch ON/OFF, adjust the brightness level and control various settings.
  7. Resetting the device
    You can reset the device to factory default manually.
  8. Removing the device
    Using the Wiser app, you can remove a device from the device list.
  9. LED indication
  10. Troubleshooting
  11. Technical data
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information
Legal Information
Privacy Policy
Change your cookie settings