Applications

Address	Register	RW	Unit	Type	Range	Bit	Description
0x3927	14632	R	–	INT16U	–	0	Cradle application enabled or disabled: 0 = Disabled 1 = Enabled
1–15	Reserved
0x3928	14633	R	–	INT16U	–	–	Quality of each bit of register 14632: 0 = Invalid 1 = Valid

Address

Unit

Type

Range

Bit

Description

0x3927

14632

–

INT16U

–

Cradle application enabled or disabled:

1–15

Reserved

0x3928

14633

–

INT16U

–

Quality of each bit of register 14632:

The table describes the registers related to the cradle management application performed by IO 1 (predefined or user defined application).

The registers 18300–18329 are related to the cradle management application performed by IO 2 (predefined or user defined application).

Address	Register	RW	Unit	Type	Range	Bit	Description
0x3BC3	15300	R-RC	–	INT16U	–	–	Quality of each bit of register 15301: 0 = Invalid 1 = Valid
0x3BC4	15301	R-RC	–	INT16U	–	–	Cradle status
						0–7	Reserved
						8	Device in disconnected position (CD)
						9	Device in connected position (CE)
						10	Device in the test position (CT)
						11–15	Reserved
0x3BC5–0x3BC6	15302–15303	R-RC-WC	–	INT32U	0–65534	–	Cradle connected position counter This counter increments for each rising edge of the cradle connected position
0x3BC7–0x3BC8	15304–15305	R-RC-WC	–	INT32U	0–65534	–	Cradle disconnected position counter This counter increments for each rising edge of the cradle disconnected position
0x3BC9–0x3BCA	15306–15307	R-RC-WC	–	INT32U	0–65534	–	Cradle test position counter This counter increments for each rising edge of the cradle test position
0x3BCB–0x3BCE	15308–15311	R-RC	–	DATETIME	–	–	Timestamp of the last change for the cradle connected position
0x3BCF–0x3BD2	15312–15315	R-RC	–	DATETIME	–	–	Timestamp of the last change for the cradle disconnected position
0x3BD3–0x3BD6	15316–15319	R-RC	–	DATETIME	–	–	Timestamp of the last change for the cradle test position
0x3BD7–0x3BD8	15320–15321	R-WC	s	INT32U	–	–	Operating time since last grease maintenance
0x3BD9–0x3BDA	15322–15323	R-WC	s	INT32U	–	–	Operating time since last move connected position
0x3BDB	15324	R	–	INT16U	0-65534	–	Cradle contact regrease counter
0x3BDC–0x3BE0	15325–15329	–	–	–	–	–	Reserved

The table describes the registers related to the Drawer management user-defined application performed by IO 1.

The registers 18330–18359 are related to the Drawer management user-defined application performed by IO 2.

Address	Register	RW	Unit	Type	Range	Bit	Description
0x3BE1	15330	R	–	INT16U	–	–	Quality of each bit of register 15331: 0 = Invalid 1 = Valid
0x3BE2	15331	R	–	INT16U	–	–	Drawer status
						0–7	Reserved
						8	Drawer in disconnected position
						9	Drawer in connected position
						10	Drawer in the test position
						11–15	Reserved
0x3BE3–0x3BE4	15332–15333	R	–	INT32U	–	–	Drawer connected position counter. This counter increments for each rising edge of the drawer connected position.
0x3BE5–0x3BE6	15334–15335	R	–	INT32U	–	–	Drawer disconnected position counter. This counter increments for each rising edge of the drawer disconnected position.
0x3BE7–0x3BE8	15336–15337	R	–	INT32U	–	–	Drawer test position counter. This counter increments for each rising edge of the drawer test position.
0x3BE9–0x3BEC	15338–15341	R	–	DATETIME	–	–	Timestamp of the last change for the drawer connected position.
0x3BED–0x3BF0	15342–15345	R	–	DATETIME	–	–	Timestamp of the last change for the drawer disconnected position.
0x3BF1–0x3BF4	15346–15349	R	–	DATETIME	–	–	Timestamp of the last change for the drawer test position.
0x3BF5–0x3BFE	15350–15359	–	–	–	–	–	Reserved

The table describes the registers related to the Light control predefined application performed by IO 1.

The registers 18400–18409 are related to the Light control predefined application performed by IO 2.

Address	Register	RW	Unit	Type	Range	Description
0x3C27	15400	R	–	INT16U	0–1	Quality of register 15401: 0 = Invalid 1 = Valid (application is configured and running)
0x3C28	15401	R	–	INT16U	0–1	Light status: 0 = Reset/OFF 1 = Set/ON
0x3C29–0x3C2A	15402–15403	R	s	INT32U	0–54000	Remaining time in ON or OFF state (depending of the light status)
0x3C2B–	15404	R	–	INT16U	0–2	Light simple command⁽¹⁾: 0 = No command 1 = Light OFF 2 = Light ON
0x3C2C–0x3C30	15405–15409	–	–	–	–	Reserved
(1) Simple commands are enabled by factory setting. The simple commands can be disabled by using the command Enable/Disable simple commands.

The table describes the registers related to the Load control predefined application performed by IO 1.

The registers 18410–18419 are related to the Load control predefined application performed by IO 2.

Address	Register	RW	Unit	Type	Range	Description
0x3C31	15410	R	–	INT16U	0–1	Quality of register 15411: 0 = Invalid 1 = Valid (application is configured and running)
0x3C32	15411	R	–	INT16U	0–1	Load status: 0 = Reset/OFF 1 = Set/ON
0x3C33–0x3C34	15412–15413	R	s	INT32U	0–54000	Remaining time in ON or OFF state (depending of the load status)
0x3C35	15414	R	–	INT16U	0–2	Load simple command⁽¹⁾: 0 = No command 1 = Load OFF 2 = Load ON
0x3C36– 0x3EEC	15415– 16109	–	–	–	–	Reserved
(1) Simple commands are enabled by factory setting. The simple commands can be disabled by using the command Enable/Disable simple commands.