Minimum/Maximum Measurements Reset Time
Overview
The minimum/maximum measurements reset time registers enable the user to know all the dates relative to the last reset minimum/maximum command.
The reset minimum/maximum command (command code 46728) can reset the content of the minimum/maximum measurements registers.
A read request of 30 registers is necessary to read the minimum/maximum measurements reset time.
Minimum/Maximum Measurements Reset Time
|
Address |
Register |
RW |
X |
Unit |
Type |
Range |
A/E |
Description |
|---|---|---|---|---|---|---|---|---|
|
0x0B53– 0x0B55 |
2900– 2902 |
R |
– |
– |
ULP DATE |
– |
A/E |
Date and time of reset of minimum/maximum current. Data Type: ULP DATE |
|
0x0B56– 0x0B58 |
2903– 2905 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of minimum/maximum voltage. |
|
0x0B59– 0x0B5B |
2906– 2908 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of minimum/maximum power (P, Q, S). |
|
0x0B5C– 0x0B5E |
2909– 2911 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of minimum/maximum power factor and cosϕ. |
|
0x0B5F– 0x0B61 |
2912– 2914 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of minimum/maximum total harmonic distortion. |
|
0x0B62– 0x0B64 |
2915– 2917 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of peak current demand. |
|
0x0B65– 0x0B67 |
2918– 2920 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of peak active, reactive, and apparent power demand. |
|
0x0B68– 0x0B6A |
2921– 2923 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of minimum/maximum frequency. |
|
0x0B6B– 0x0B6D |
2924– 2926 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of minimum/maximum thermal image of motor. |
|
0x0B6E– 0x0B70 |
2927– 2929 |
R |
– |
– |
ULP DATE |
– |
E |
Date and time of reset of energy (active, reactive, and apparent). |