DOCA0095EN

Description of a Circuit Breaker with a Toggle Handle

PowerPact B Front Face with Toggle Handle

The following figure shows the controls and indicators for a 3-pole unit mount circuit breaker with a toggle handle. The location of controls and indicators may differ for the other types of circuit breakers. Information about the other parts of the front face is available in the general description (see Unit-Mount Circuit Breaker Description).

  1. QR code

  2. Device identification

  3. Toggle handle for opening, closing, and resetting

  4. Push-to-trip button

  5. Protection/trip curve

Device Identification for PowerPact B with Toggle Handle

The following figure shows an example of the device identification

A. Circuit breaker type

B. Commercial reference

C. Circuit breaker symbol

D. UL interrupting rating

E. Certification marks

F. Frame rating

G. Termination characteristics

H. Reference standard

I. Ui: rated insulation voltage

J. Uimp: rated impulse withstand voltage

K. IEC interrupting ratings, according to operating voltage Ue:
Icu: Ultimate breaking capacity
Ics: Service breaking capacity

 

Icu: Ultimate breaking capacity
Ics: Service breaking capacity

QR Code

Scan the QR code to get additional information about the circuit breaker from the Schneider Electric web site. To scan the QR code, use a smartphone that is equipped with a camera and installed with a QR code reader.

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?