5250CT9201

Additional Items

Ceiling Drop-Out

Split Cover

The split cover is 12 inches long and is split down the middle of a 3 x 8 in. (76 x 203 mm) oblong opening. This allows installation of factory-terminated cables. The split covers are field installed where required and come complete with grommeting material to “bush” the opening to protect the installed cables.

Duct Type
in. (mm)
Catalog Number Weight
lb. kg
6.00 (152) Flush Mounted

RWT06ACP

2.4 1.1
10.00 (254) Flush Mounted

RWT10ACP

3.1 1.4
18.00 (457) Flush Mounted

RWT18ACP

4.8 2.2
6.00 (152) Surface Mounted

RWT06ACPS

2.6 1.1
10.00 (254) Surface Mounted

RWT10ACPS

3.3 1.5
18.00 (457) Surface Mounted

RWT18ACPS

5.0 2.3

Flanged Cabinet Connector

The flanged cabinet connector is an alternate method of connecting duct to a panel or cabinet when the application requires spreading of the cables prior to entry.

Connector Type
in. (mm)
Catalog Number Weight
lb. kg
10.00 (254) Flush Mounted

RWT10CUC

8.0 3.6
10.00 (254) Surface Mounted

RWT10CUCS

7.4 3.4

Sweep Edgewise Tee Kit

The sweep edgewise tee kit provides a larger radius surface around which to install cables with long bending radii.

Duct Type
in. (mm)
Catalog Number Weight
lb. kg
10.00 (254) Duct

RWT10SWET

7.0 3.2
18.00 (457) Duct

RWT18SWET

10.0 4.5

Dust Cover

The dust cover keeps dust and debris from collecting on the top surface of horizontally-mounted surface duct.

Dust Cover Length
ft. (m)
Catalog Number Weight
lb. kg
5.00 (1.5)

RWTDCOV60

3.5 1.6
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?