Metering Screens

Readout as instantaneous rms value of the:

• 3 phase currents I1/A, I2/B, and I3/C

A

The down arrow indicates the conductor (phase, neutral, or ground) corresponding to the value shown.

• Ground-fault current (MicroLogic 6)

% Ig

• Neutral current IN (4-pole or 3-pole with ENCT option)

A

Readout and resetting of the:

• Maximum Ii MAX for the 3 phase currents

A

The down arrow indicates the conductor (phase, neutral, or ground) on which the maximum was measured.

• Maximum ground-fault current (MicroLogic 6)

% Ig

• Maximum IN MAX for the neutral current (4-pole or 3-pole with ENCT option)

A

Readout as instantaneous rms value of the:

• 3 phase currents I1/A, I2/B, and I3/C

A

The down arrow indicates the conductor (phase, neutral, or ground) corresponding to the value shown.

• Ground-fault current (MicroLogic 6)

% Ig

• Earth-leakage current (MicroLogic 7)

A

• Neutral current IN (4-pole or 3-pole with ENCT option)

A

Readout as instantaneous rms value of the:

• Phase-to-phase voltages V12, V23, and V31

• Phase-to-neutral voltages V1N, V2N, and V3N (4-pole or 3-pole with ENVT option)

V

The down arrows indicate the conductors (phases or neutral) corresponding to the value shown.

Readout of the total active power Ptot

kW

The down arrows indicate the 3 phase conductors.

Readout of the total apparent power Stot

kVA

Readout of the total reactive power Qtot

kVAR

Readout and resetting of the active energy meter Ep

kWh, MWh

Readout and resetting of the apparent energy meter Es

kVAh, MVAh

Readout and resetting of the reactive energy meter Eq

kVARh, MVARh

Readout of the phase rotation

–

Readout and resetting of the:

• Maximum Ii MAX for the 3 phase currents

A

The down arrow indicates the conductor (phase, neutral, or ground) on which the maximum was measured.

• Maximum ground-fault current (MicroLogic 6)

% Ig

• Maximum earth-leakage current (MicroLogic 7)

A

• Maximum IN MAX for the neutral current (4-pole or 3-pole with ENCT option)

A

Readout and resetting of the:

• Maximum Vij MAX for the 3 phase-to-phase voltages

• Maximum ViN MAX for the 3 phase-to-neutral voltages (4-pole or 3-pole with ENVT option)

V

The down arrows indicate the phases between which the maximum V MAX L-L or L-N was measured.

Readout and resetting of the maximum P MAX of the active power

kW

The down arrows indicate the 3 phase conductors.

Readout and resetting of the maximum S MAX of the apparent power

kVA

Readout and resetting of the maximum Q MAX of the reactive power

kVAR