About the Book
Document Scope
The aim of this guide is to provide users, installers, and maintenance personnel with technical information needed to operate EasyPact™ MVS1 circuit breakers with TS trip systems in compliance with the IEC standards.
Validity Note
This guide applies to EasyPact MVS1 circuit breakers with TS trip systems:
-
With firmware version 004.029.048 or greater
-
With hardware version 001.000.000 or greater
Online Information
The information contained in this guide is likely to be updated at any time. Schneider Electric strongly recommends that you have the most recent and up-to-date version available on www.se.com/ww/en/download.
The technical characteristics of the devices described in this guide also appear online. To access the information online, go to the Schneider Electric home page at www.se.com.
Related Documents
| Title of documentation | Reference number |
|---|---|
| EasyPact MVS - TS Trip System - User Guide | |
| EasyPact MVS IEC Circuit Breakers with ETA and ETV Trip Systems From 630 to 4000 A - User Guide | |
| EasyPact MVS - TS Trip System - Firmware Release Notes | |
| EasyPact MVS Fixed or Drawout Circuit Breaker or Switch-Disconnectors - Instruction Sheet | S1B70236 |
Information on Non-Inclusive or Insensitive Terminology
As a responsible, inclusive company, Schneider Electric is constantly updating its communications and products that contain non-inclusive or insensitive terminology. However, despite these efforts, our content may still contain terms that are deemed inappropriate by some customers.
Trademarks
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.