990-91379F-034

Kullanıcı Arayüzüne Genel Bakış

Display

Overview of the Home Screen

  1. Home button - tap this button on any screen to return to the home screen.

  2. Main menu button - tap this button on any screen to access the menus.

  3. Mimic diagram button - tap this button on any screen to access the mimic diagram.

  4. Alarm status symbol - tap this button on any screen to access the active alarms log.

You can tap on the output or battery fields on the home screen to go directly to the detailed measurement pages.

Mimic Diagram

The mimic diagram will adapt to your system configuration – the mimic diagrams shown here are just examples.

Example of Single UPS System – Dual Mains

The green power line (gray in illustration) in the mimic diagram shows the power flow through the UPS system. Active modules (inverter, rectifier, battery, static bypass switch, etc.) are framed in green and inactive modules are framed in black. Modules framed in red are inoperable or in an alarm condition.

NOT: The mimic diagram only shows one battery disconnect device BB even if more battery disconnect devices have been connected and configured for monitoring. If one or more of the monitored battery disconnect devices are in the closed position, the BB on the mimic diagram will show as closed. If all of the monitored battery disconnect devices are in the open position, the BB on the mimic diagram will show as open.

In mimic diagrams for parallel systems, tap on the gray UPS to see the mimic diagram on UPS level.

Example of Parallel System – Dual Mains with Individual UIB and SSIB

Alarm Status Symbol

The alarm status symbol (gray in illustration) in the top right corner of the display changes depending on the alarm status of the UPS system.

Green: No alarms present in the UPS system.
Blue: Informational alarm(s) present in the UPS system. Tap the alarm status symbol to open the active alarms log.
Yellow: Warning alarm(s) present in the UPS system. Tap the alarm status symbol to open the active alarms log.
Red: Critical alarm(s) present in the UPS system. Tap the alarm status symbol to open the active alarms log.

Menü Ağacı

  • Durum

    • Giriş

    • Çıkış

    • Bypass

    • Akü

    • Sıcaklık

    • Güç modülleri

    • Peak shaving

    • Paralel*

  • Olay Kayıtları

  • Kontrol*

    • Çalışma modu

    • İnvertör

    • Şarjör

    • Sıralama rehberleri

  • Konfigürasyon*

    • UPS

    • Çıkış

    • Akü

      • Genel ayarlar

      • Özel ayarlar

    • Yüksek verimlilik

      • Zamanlama

    • Şebeke etkileşimli UPS

      • Korumalı Modbus

    • Kesiciler

    • Kontaklar ve röleler

    • Modbus

    • Genel

    • Hatırlatma

    • Kaydet/ geri yükle

    • Durumu güncelle

  • Bakım

    • Sesli ikaz

    • Durum LED'leri

    • Kesici ışığı

    • Akü*

    • Akü süre kalibrasyon*

    • Akü değiştirme*

    • Akü SPoT modu*

    • UPS raporu*

  • İstatistikler

  • Hakkında

  • Oturumu Kapat

  • Bayrak butonu – Ekran dilini ayarlamak için bu butona basın.

Bazı menüler bu kılavuzda anlatılanlardan daha fazla alt menü içerir. Bu butonlar grileşmiştir ve yalnızca istenmeyen yük etkilerinden kaçınmak için Schneider Electric Service tarafından kullanım içindir. Belirli bir UPS sistemiyle ilgili değilse veya henüz serbest bırakılmamışlarsa, diğer menü öğeleri de ekranda grileşebilir/gösterilmeyebilir.

Sistem Seviyesi Kontrolörü (SLC) ve Ünite Kontrolörüne (UC) Genel Bakış

  1. İnvertör ON/OFF butonları

  2. USB portları*

  3. Evrensel G/Ç*

  4. Modbus portu*

  5. USB Mikro-B portu*

  6. Ağ portu*

  7. Sıfırla butonu*

  8. Durum LED'leri*

  9. Ekran güç beslemesi

  10. Ekran portu

  11. Servis portu*

  12. Gelecekte kullanım içindir

  13. Gelecekte kullanım içindir

  14. PBUS 1*

  15. PBUS 2*

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Bu yardımcı oldu mu?