Configure the Breakers
- Tap .
- Tap the different breakers in the mimic diagram to configure which breakers are present
in the UPS system. Square with a √ means that the breaker is present, empty square means that the breaker is not present,
grayed out square means that the breaker is automatically configured in your UPS system.NOTE: The UPS can monitor up to two battery breakers in a standard battery solution. The UPS can monitor up to four battery breakers in a modular battery solution – this is configured automatically by the UPS. The mimic diagram only shows one battery breaker BB even if more battery breakers have been connected and configured for monitoring. If one or more of the monitored battery breakers are in the closed position, the BB on the mimic diagram will show as closed. If all of the monitored battery breakers are in the open position, the BB on the mimic diagram will show as open.
- Tap OK to save your settings.