Analog value object
There is one Analog Value (AV) object available on the
meter, named AV00 - Command. The available commands are listed in
the following table. Enter the number in the Present_Value column
in the Present_Value property of the AV object to write the associated
command to the meter.
|
Command |
Present_Value entry |
Object name / description |
|---|---|---|
|
Acknowledge Overload Alarm |
20001.00 |
Acknowledge an overload alarm. The alarm indicator disappears from the front panel display after you acknowledge the alarm; however, this does not address the state that caused the alarm. |
|
Reset Partial Energy Counter |
2020.00 |
Reset partial energy accumulation to 0. Partial Active / Reactive Energy, Energy by Tariff and Phase Energy registers are reset. |
|
Reset Input Metering Counter |
2023.00 |
Resets input metering accumulation to 0. |