SNMP OID List

There are several object identifiers (OID) available from the EcoStruxure Battery Management System webmanager via SNMP. The webmanager SNMP access needs to be configured. To view and change the SNMP settings from the web interface navigate to Services > SNMP Agent.

The MIB file can be downloaded from: www.se.com.

NOTE: Some read values have a scale factor. The read value needs to be multiplied with the scale facture to get the correct value for the unit of measure.

Settings OIDs

NOTE: The bacsSettings shows configured settings and alarm thresholds for the setup. The table bacsSettings lists a mix of read only and read-write OIDs. All other tables only contain read only OIDs.

OID Address: 1.3.6.1.2.1.33.5.1 / OID Name: bacsSettings

OID Address	OID Name	Description (read only / read-write)	Scale [Unit]	Example of Read Value*
1.3.6.1.2.1.33.5.1.1	bacsModuleType	Module Type. 0 = C20, 1 = C21, 10 = C30, 20 = C40, 20 = C41. (read only)	1	c20(0) -> Module type C20
1.3.6.1.2.1.33.5.1.2	bacsNumStrings	Number of battery strings. (read only)	1	2
1.3.6.1.2.1.33.5.1.3	bacsNumBatteries	Total number of batteries. (read only)	1	18
1.3.6.1.2.1.33.5.1.4	bacsBattCap	Capacity of installed batteries. (read only)	1 [Ah]	50
1.3.6.1.2.1.33.5.1.5	bacsLogRate1	The configured period between log recordings during normal operation. Period between log recordings. (read only)	1 [s]	1200 -> 1200 seconds (20 minutes)*
1.3.6.1.2.1.33.5.1.6	bacsLogRate2	The configured period between log recordings during charge or discharge. (read only)	1 [s]	(The readings are done as soon as possible.)*
1.3.6.1.2.1.33.5.1.7	bacsImpcPollRate	The configured period between internal impedance polls. (read-write)	1 [min]	720 -> 720 minutes (12 hours)*
1.3.6.1.2.1.33.5.1.8	bacsImpcLowAlarm	Impedance low alarm level. (read-write)	0.01 [mΩ]	110 -> 1.1 mΩ
1.3.6.1.2.1.33.5.1.9	bacsImpcHighAlarm	Impedance high alarm level. (read-write)	1	5000 -> 50 mΩ
1.3.6.1.2.1.33.5.1.10	bacsTemperatureLowAlarm	Temperature alarm below this level. (read-write)	0.1 [C° or F°]*	50 -> 5 C°
1.3.6.1.2.1.33.5.1.11	bacsTemperatureHighAlarm	Temperature alarm above this level. (read-write)	0.1 [C° or F°]*	350 -> 35 C°
1.3.6.1.2.1.33.5.1.12	bacsVoltageLowAlarm	Voltage alarm below this level. (read-write)	0.01 [V]	1200 -> 12 V
1.3.6.1.2.1.33.5.1.13	bacsVoltageHighAlarm	Voltage alarm above this level. (read-write)	0.01 [V]	1550 -> 15.5 V
1.3.6.1.2.1.33.5.1.14	bacsImpcLowWarn	Impedance low warning level. (read-write)	0.01 [mΩ]	120 -> 1.2 mΩ
1.3.6.1.2.1.33.5.1.15	bacsImpcHighWarn	Impedance high warning level. (read-write)	0.01 [mΩ]	4000 -> 40 mΩ
1.3.6.1.2.1.33.5.1.16	bacsTemperatureLowWarn	Temperature warning below this level. (read-write)	0.1 [C° or F°]*	100 -> 10 C°
1.3.6.1.2.1.33.5.1.17	bacsTemperatureHighWarn	Temperature warning above this level. (read-write)	0.1 [C° or F°]*	300 -> 30 C°
1.3.6.1.2.1.33.5.1.18	bacsVoltageLowWarn	Voltage warning below this level. (read-write)	0.01 [V]	1200 -> 12 V
1.3.6.1.2.1.33.5.1.19	bacsVoltageHighWarn	Voltage warning above this level. (read-write)	0.01 [V]	1410 -> 14.1 V
1.3.6.1.2.1.33.5.1.20	bacsTemperatureUnit	Temperature unit currently in use. 0 = Celsius, 1 = Fahrenheit. (read-write)	1	Celsius(0)
1.3.6.1.2.1.33.5.1.21	bacsStringVoltageLowAlarm	The configured alarm threshold for the battery string voltage low alarm. (read-write)	0.01 [V]	10500 -> 105 V
1.3.6.1.2.1.33.5.1.22	bacsStringVoltageHighAlarm	The configured alarm threshold for the battery string voltage high alarm. (read-write)	0.01 [V]	13500 -> 135 V
1.3.6.1.2.1.33.5.1.23	bacsStringVoltageLowWarn	The configured alarm threshold for the battery string voltage low warning. (read-write)	0.01 [V]	11000 -> 110 V
1.3.6.1.2.1.33.5.1.24	bacsStringVoltageHighWarn	The configured alarm threshold for the battery string voltage high warning. (read-write)	0.01 [V]	12500 -> 125 V
1.3.6.1.2.1.33.5.1.25	bacsStringCurrentDeviationDischargeAlarm	The configured alarm threshold for the current difference between the battery strings alarm. (read-write)	0.01 [A]	1000 -> 10 A
1.3.6.1.2.1.33.5.1.26	bacsStringCurrentDeviationChargeAlarm	The configured alarm threshold for the charge current difference between the battery strings alarm. (read-write)	0.01 [A]	1000 -> 10 A
1.3.6.1.2.1.33.5.1.27	bacsStringCurrentDeviationDischargeWarn	The configured warning threshold for the charge current difference between the battery strings warning. (read-write)	0.01 [A]	500 -> 5 A
1.3.6.1.2.1.33.5.1.28	bacsStringCurrentDeviationChargeWarn	The configured warning threshold for the charge current difference between the battery warning. (read-write)	0.01 [A]	500 -> 5 A

Objects OIDs

OID Address: 1.3.6.1.2.1.33.5.2 / OID Name: bacsObjects

OID Address	OID Name	Description	Scale [Unit]	Example of Read Value
1.3.6.1.2.1.33.5.2.1	bacsStatus	EcoStruxure Battery Management System status flags. For information about the flags see General Status Flags Description.	(Decimal format)	65 -> 0x0041
1.3.6.1.2.1.33.5.2.2	bacsAvModuleVolt	Average module voltage.	0.01 [V]	1287 -> 12.87 V
1.3.6.1.2.1.33.5.2.3	bacsTotalVolt	Total voltage of all modules.	0.01 [V]	23176 -> 231.76 V
1.3.6.1.2.1.33.5.2.4	bacsNumModules	The number of installed battery modules.	1	18
1.3.6.1.2.1.33.5.2.5	bacsModuleTable	The list of battery table entries.	N/A	N/A
1.3.6.1.2.1.33.5.2.5.1	bacsModuleEntry	An entry containing information applicable to a particular battery.	N/A	N/A
1.3.6.1.2.1.33.5.2.5.1.1	bacsModuleIndex	The module identifier.	1	bacsModuleIndex.1: 0 bacsModuleIndex.2: 1 ….
1.3.6.1.2.1.33.5.2.5.1.2	bacsModuleVoltage	Ordered list of the measured battery voltage by each module.	0.01 [V]	bacsModuleVoltage.1: 1290 bacsModuleVoltage.2: 1288 ….
1.3.6.1.2.1.33.5.2.5.1.3	bacsModuleTemperature	Ordered list of the temperature measured by each module.	0.1 [C° or F°]*	bacsModuleTemperature.1: 270 bacsModuleTemperature.2: 270 ….
1.3.6.1.2.1.33.5.2.5.1.4	bacsModuleBypass	Ordered list of the module bypass measured by each module.	0.1 [%]	bacsModuleBypass.1: 0 bacsModuleBypass.2: 0 ….
1.3.6.1.2.1.33.5.2.5.1.5	bacsModuleResistance	Ordered list of the measured module impedance in each module.	0.01 [mΩ]	bacsModuleResistance.1: 468 bacsModuleResistance.2: 471 ….
1.3.6.1.2.1.33.5.2.5.1.6	bacsModuleState	The general module alarm flags. For information about the flags see Alarm Flags Description.	(Decimal format)	bacsModuleState.1: 0 bacsModuleState.2: 0 …. (0 -> 0x0000)
1.3.6.1.2.1.33.5.2.6	bacsNumStrings	The number of installed battery strings.	1	2
1.3.6.1.2.1.33.5.2.7	bacsStringTable	The list of stringy table entries.	N/A	N/A
1.3.6.1.2.1.33.5.2.7.1	bacsStringEntry	An entry that contains information about a specific string of batteries.	N/A	N/A
1.3.6.1.2.1.33.5.2.7.1.1	bacsStringIndex	The string identifier.	1	bacsStringIndex.1: 0 bacsStringIndex.2: 1 ….
1.3.6.1.2.1.33.5.2.7.1.2	bacsStringCurrent	The string current.	0.01 [A]	bacsStringCurrent.1: 0 bacsStringCurrent.2: 0 ….
1.3.6.1.2.1.33.5.2.7.1.3	bacsStringTotalVolt	The string total voltage.	0.01 [V]	bacsStringTotalVolt.1: 11497 bacsStringTotalVolt.2: 11438 ….
1.3.6.1.2.1.33.5.2.7.1.4	bacsStringAverageVol	The string average voltage per battery.	0.01 [V]	bacsStringAverageVol.1: 1277 bacsStringAverageVol.2: 1270 ….
1.3.6.1.2.1.33.5.2.7.1.5	bacsStringCurrentAC	The string AC current.	0.01 [A]	bacsStringCurrentAC.1: 0 bacsStringCurrentAC.2: 0 ….
1.3.6.1.2.1.33.5.2.7.1.6	bacsStringAlarm	The general string alarm flags. For information about the flags see Alarm Flags Description.	(Decimal format)	bacsStringAlarm.1: 0 bacsStringAlarm.2: 0 …. (0 -> 0x0000)
1.3.6.1.2.1.33.5.2.7.1.7	bacsStringAlarm2	The string alarm flags. For information about the flags see Battery String Alarm Flags Description.	(Decimal format)	bacsStringAlarm2.1: 0 bacsStringAlarm2.2: 0 …. (0 -> 0x0000)

Alarm OIDs

OID Address: 1.3.6.1.2.1.33.5.3 / OID Name: bacsAlarms

OID Address	OID Name	Description
1.3.6.1.2.1.33.5.3.1	bacsAlarmsPresent	The present number of active alarm conditions.
1.3.6.1.2.1.33.5.3.2	bacsAlarmTable	A list of alarm entries.
1.3.6.1.2.1.33.5.3.2.1	bacsAlarmEntry	An entry containing information applicable to a particular alarm.
1.3.6.1.2.1.33.5.3.2.1.1	bacsAlarmId	A unique identifier for an alarm condition. This value must remain constant.
1.3.6.1.2.1.33.5.3.2.1.2	bacsAlarmDescr	A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.
1.3.6.1.2.1.33.5.3.2.1.3	bacsAlarmTime	The value of sysUpTime when the alarm condition was detected. If the alarm condition was detected during the webmanager startup and presumably existed before the webmanager startup, then dcAlarmTime = 0.
1.3.6.1.2.1.33.5.3.3	bacsWellKnownAlarms	A list of traps, see Alarm Trap List.
1.3.6.1.2.1.33.5.3.4	bacsModuleAlarmsPresent	The number of EcoStruxure Battery Management System modules currently in an alarm state.
1.3.6.1.2.1.33.5.3.5	bacsModuleWarningsPresent	The number of EcoStruxure Battery Management System modules currently in a warning state.

Alarm Trap List

NOTE: Make sure a trap receiver is correctly configured to receive notification when the trap is active.

OID Address (SNMP Traps): 1.3.6.1.2.1.33.5.3.3 / OID Name: bacsWellKnownAlarms

OID Address	OID Name	Description
1.3.6.1.2.1.33.5.3.3.1	bacsAlarmSystemError	This object indicates a communication problem from the webmanager to one or more of the battery modules.
1.3.6.1.2.1.33.5.3.3.2	bacsAlarmResistWarn	This object indicates that the internal resistance of one or more batteries is above the warning level.
1.3.6.1.2.1.33.5.3.3.3	bacsAlarmResistAlarm	This object indicates that the internal resistance of one or more batteries is above the alarm level.
1.3.6.1.2.1.33.5.3.3.4	bacsAlarmVoltage	This object indicates that the voltage of one or more batteries is outside the defined rage.
1.3.6.1.2.1.33.5.3.3.5	bacsAlarmTemperature	This object indicates that the temperature of one or more batteries is outside the defined range.
1.3.6.1.2.1.33.5.3.3.6	bacsAlarmVoltageHigh	This object indicates that the voltage of one or more batteries is higher than the defined range.
1.3.6.1.2.1.33.5.3.3.7	bacsAlarmVoltageLow	This object indicates that the voltage of one or more batteries is lower than the defined range.
1.3.6.1.2.1.33.5.3.3.8	bacsAlarmTemperatureHigh	This object indicates that the temperature of one or more batteries is higher than the defined range.
1.3.6.1.2.1.33.5.3.3.9	bacsAlarmTemperatureLow	This object indicates that the temperature of one or more batteries is lower than the defined range.
1.3.6.1.2.1.33.5.3.3.10	bacsAlarmResistAlarmHigh	This object indicates that the internal resistance of one or more batteries is above the alarm level.
1.3.6.1.2.1.33.5.3.3.11	bacsAlarmResistAlarmLow	This object indicates that the internal resistance of one or more batteries is below the alarm level.
1.3.6.1.2.1.33.5.3.3.12	bacsAlarmEqualizing	This object indicates that the equalizing is not operating correctly.
1.3.6.1.2.1.33.5.3.3.13	bacsAlarmVoltageWarnHigh	This object indicates that the voltage of one or more batteries is higher than the defined warning range.
1.3.6.1.2.1.33.5.3.3.14	bacsAlarmVoltageWarnLow	This object indicates that the voltage of one or more batteries is lower than the defined warning range.
1.3.6.1.2.1.33.5.3.3.15	bacsAlarmTemperatureWarnHigh	This object indicates that the temperature of one or more batteries is higher than the defined warning range.
1.3.6.1.2.1.33.5.3.3.16	bacsAlarmTemperatureWarnLow	This object indicates that the temperature of one or more batteries is lower than the defined warning range.
1.3.6.1.2.1.33.5.3.3.17	bacsAlarmResistWarnHigh	This object indicates that the internal resistance of one or more batteries is higher than the defined warning range.
1.3.6.1.2.1.33.5.3.3.18	bacsAlarmResistWarnLow	This object indicates that the internal resistance of one or more batteries is lower than the defined warning range.
1.3.6.1.2.1.33.5.3.3.19	bacsAlarmInitializing	The webmanager is initializing.
1.3.6.1.2.1.33.5.3.3.20	bacsAlarmCommunicationLost	BACS bus communication is lost.
1.3.6.1.2.1.33.5.3.3.21	bacsAlarmBatteryBreakerOpen	Battery breaker is open.
1.3.6.1.2.1.33.5.3.3.22	bacsAlarmThermalRunaway	Thermal runaway detected.
1.3.6.1.2.1.33.5.3.3.23	bacsAlarmSensorCommunicationLost	Sensor communication is lost.
1.3.6.1.2.1.33.5.3.3.24	bacsAlarmDischarging	Batteries are being discharged.
1.3.6.1.2.1.33.5.3.3.25	bacsAlarmDischargingStopped	Batteries are no longer being discharged.
1.3.6.1.2.1.33.5.3.3.26	bacsAlarmMaxVoltageDiff	The voltage difference is too high.
1.3.6.1.2.1.33.5.3.3.27	bacsAlarmStringVoltHigh	The battery string voltage is above the configured alarm threshold.
1.3.6.1.2.1.33.5.3.3.28	bacsAlarmStringVoltLow	The battery string voltage is below the configured alarm threshold.
1.3.6.1.2.1.33.5.3.3.29	bacsAlarmStringVoltHighWarn	The battery string voltage is above the configured warning threshold.
1.3.6.1.2.1.33.5.3.3.30	bacsAlarmStringVoltLowWarn	The battery string voltage is below the configured warning threshold.
1.3.6.1.2.1.33.5.3.3.31	bacsAlarmStringCurrentHigh	The battery string current is above the configured alarm threshold.
1.3.6.1.2.1.33.5.3.3.32	bacsAlarmStringCurrentLow	The battery string current is below the configured alarm threshold.
1.3.6.1.2.1.33.5.3.3.33	bacsAlarmStringCurrentHighWarn	The battery string current is above the configured warning threshold.
1.3.6.1.2.1.33.5.3.3.34	bacsAlarmStringCurrentLowWarn	The battery string current is below the configured warning threshold.
1.3.6.1.2.1.33.5.3.3.35	bacsAlarmStringEqualizingDisabled	The battery string equalizing is disabled.
1.3.6.1.2.1.33.5.3.3.36	bacsAlarmStringCurrDeviationCharge	The charge current difference between the battery strings is above the configured alarm threshold.
1.3.6.1.2.1.33.5.3.3.37	bacsAlarmStringCurrDeviationDischarge	The discharge current difference between the battery strings is above the configured alarm threshold.
1.3.6.1.2.1.33.5.3.3.38	bacsAlarmStringCurrDeviationChargeWarn	The charge current difference between the battery strings is above the configured warning threshold.
1.3.6.1.2.1.33.5.3.3.39	bacsAlarmStringCurrDeviationDischargeWarn	The discharge current difference between the battery strings is above the configured warning threshold.

Traps OIDs

NOTE: Make sure a trap receiver is correctly configured to receive notification when the trap is active.

OID Address (SNMP Traps): 1.3.6.1.2.1.33.5.4 / OID Name: bacsTraps

OID Address	OID Name	Description
1.3.6.1.2.1.33.5.4.1	bacsTrapAlarmEntryAdded	Sent when an alarm in the system appears.
1.3.6.1.2.1.33.5.4.2	bacsTrapAlarmEntryRemoved	Sent when an alarm in the system disappears.

GX_R_AUX OIDs

NOTE: In gxRAUX the input OIDs can have the status normal or alarm. The output OIDs can have the status on or off.

OID Address: 1.3.6.1.2.1.33.5.5 / OID Name: gxRAUX

OID Address	OID Name	Description	Example of Read Value
1.3.6.1.2.1.33.5.5.1	gxRAUX1Input1	Status of input 1 on GX_R_AUX 1.	normal ( 1 )
1.3.6.1.2.1.33.5.5.2	gxRAUX1Input2	Status of input 2 on GX_R_AUX 1.	normal ( 1 )
1.3.6.1.2.1.33.5.5.3	gxRAUX1Input3	Status of input 3 on GX_R_AUX 1.	normal ( 1 )
1.3.6.1.2.1.33.5.5.4	gxRAUX1Input4	Status of input 4 on GX_R_AUX 1.	normal ( 1 )
1.3.6.1.2.1.33.5.5.5	gxRAUX1Output1	Status of output 1 on GX_R_AUX 1.	off ( 0 )
1.3.6.1.2.1.33.5.5.6	gxRAUX1Output2	Status of output 2 on GX_R_AUX 1.	off ( 0 )
1.3.6.1.2.1.33.5.5.7	gxRAUX1Output3	Status of output 3 on GX_R_AUX 1.	off ( 0 )
1.3.6.1.2.1.33.5.5.8	gxRAUX1Output4	Status of output 4 on GX_R_AUX 1.	off ( 0 )
1.3.6.1.2.1.33.5.5.9	gxRAUX2Input1	Status of input 1 on GX_R_AUX 2.	normal ( 1 )
1.3.6.1.2.1.33.5.5.10	gxRAUX2Input2	Status of input 2 on GX_R_AUX 2.	normal ( 1 )
1.3.6.1.2.1.33.5.5.11	gxRAUX2Input3	Status of input 3 on GX_R_AUX 2.	normal ( 1 )
1.3.6.1.2.1.33.5.5.12	gxRAUX2Input4	Status of input 4 on GX_R_AUX 2.	normal ( 1 )
1.3.6.1.2.1.33.5.5.13	gxRAUX2Output1	Status of output 1 on GX_R_AUX 2.	off ( 0 )
1.3.6.1.2.1.33.5.5.14	gxRAUX2Output2	Status of output 2 on GX_R_AUX 2.	off ( 0 )
1.3.6.1.2.1.33.5.5.15	gxRAUX2Output3	Status of output 3 on GX_R_AUX 2.	off ( 0 )
1.3.6.1.2.1.33.5.5.16	gxRAUX2Output4	Status of output 4 on GX_R_AUX 2.	off ( 0 )
1.3.6.1.2.1.33.5.5.17	gxRAUX3Input1	Status of input 1 on GX_R_AUX 3.	normal ( 1 )
1.3.6.1.2.1.33.5.5.18	gxRAUX3Input2	Status of input 2 on GX_R_AUX 3.	normal ( 1 )
1.3.6.1.2.1.33.5.5.19	gxRAUX3Input3	Status of input 3 on GX_R_AUX 3.	normal ( 1 )
1.3.6.1.2.1.33.5.5.20	gxRAUX3Input4	Status of input 4 on GX_R_AUX 3.	normal ( 1 )
1.3.6.1.2.1.33.5.5.21	gxRAUX3Output1	Status of output 1 on GX_R_AUX 3.	off ( 0 )
1.3.6.1.2.1.33.5.5.22	gxRAUX3Output2	Status of output 2 on GX_R_AUX 3.	off ( 0 )
1.3.6.1.2.1.33.5.5.23	gxRAUX3Output3	Status of output 3 on GX_R_AUX 3.	off ( 0 )
1.3.6.1.2.1.33.5.5.24	gxRAUX3Output4	Status of output 4 on GX_R_AUX 3.	off ( 0 )
1.3.6.1.2.1.33.5.5.25	gxRAUX4Input1	Status of input 1 on GX_R_AUX 4.	normal ( 1 )
1.3.6.1.2.1.33.5.5.26	gxRAUX4Input2	Status of input 2 on GX_R_AUX 4.	normal ( 1 )
1.3.6.1.2.1.33.5.5.27	gxRAUX4Input3	Status of input 3 on GX_R_AUX 4.	normal ( 1 )
1.3.6.1.2.1.33.5.5.28	gxRAUX4Input4	Status of input 4 on GX_R_AUX 4.	normal ( 1 )
1.3.6.1.2.1.33.5.5.29	gxRAUX4Output1	Status of output 1 on GX_R_AUX 4.	off ( 0 )
1.3.6.1.2.1.33.5.5.30	gxRAUX4Output2	Status of output 2 on GX_R_AUX 4.	off ( 0 )
1.3.6.1.2.1.33.5.5.31	gxRAUX4Output3	Status of output 3 on GX_R_AUX 4.	off ( 0 )
1.3.6.1.2.1.33.5.5.32	gxRAUX4Output4	Status of output 4 on GX_R_AUX 4.	off ( 0 )