User Interface Layout

Overview

This graphic shows the IFE user interface layout.

A	Header
B	Menu bar
C	Submenu bar
D	Webpages
E	Display zone
F	Action field

Header

The header displays the following information at the top of all the pages.

A	IFE name
B	Intrusive command mode
C	Date and time
D	IP address
E	Device Location
F	My Profile Logout
G	User name

Header Part	Description
IFE name	Device name of the IFE interface.
Intrusive command mode	: The intrusive command mode is Locked, the remote control commands are disabled. : The intrusive command mode is Unlocked (default setting), the remote control commands are enabled.
Date and time	Current date in yyyy-mm-dd format. Current time in hh-mm-sec format.
IP address	IPv4 address of the interface.
Device Location	Click Device Location to locate the selected interface in your equipment: The ULP LED of the selected interface blinks for 15 seconds (test mode). The icon blinks 1 second ON and 1 second OFF when the device location is activated.
My Profile	Click to change your account password in the Accounts Details Modification window.
Logout	Click to log out from the IFE session, or close your browser. It is recommended to log out from the IFE session when it is not in use.
User name	Name of the user who has logged in.

Menu Bar

The main tabs in the menu bar are:

MONITORING & CONTROL
DIAGNOSTICS
SETTINGS
SECURITY

Submenu Bar

The subtabs in the submenu bar display the submenus under the selected main tab.

Webpages

The navigation menu under each subtab lists the webpages for the selected submenu.

Action Fields

The action fields correspond to the selected tab and it varies.

The following table describes the generic action fields on Setting and Security webpages:

Action Fields	Action
Apply Changes	Applies the setting changes.
Cancel Changes	Cancels the setting modifications and returns to the last saved settings.

For some settings, after clicking Apply Changes , a pop-up message is displayed for confirmation to restart the IFE interface to apply the new settings:

Click Yes to restart and apply the setting changes.
Click No to cancel the setting modifications and return to the last saved settings.

Display Zone

The display zone shows the selected subtab in detail with all the related fields.