Enerlin’X IFE Ethernet Interface for One Circuit Breaker – User Guide

DOCA0142EN-11

Modbus

Description

The MODBUS page displays the global statistics of TCP/IP and TCP port connections.

The users with installer or engineer roles can make changes to the Diagnostics page settings.

Navigation to the Modbus Page

To view the MODBUS page, click DIAGNOSTICS > COMMUNICATION > MODBUS.

Global Statistics Parameters

Global Statistics	Parameter	Description
TCP/IP	Frames Received	Number of frames received
	Frames Transmitted	Number of frames transmitted
	Port Status	Status of the connected Ethernet port: Operational Idle If MODBUS TCP/IP is disabled, the Port Status value is displayed as Idle.
	Opened Connections	Number of active connections
Serial	Frames Received	Number of frames received
	Frames Transmitted	Number of frames transmitted
	Error Messages	Number of error messages
Click Reset Counters to reset the statistics values to 0. If the IFE interface is switched off or if it is reset due to a configuration change or another event, the statistics values are reset to 0.

Modbus TCP Port Connections Parameters

Parameter	Description
Index	Serial number
Remote IP	Remote IP address
Remote Port	Remote port number
Local Port	Local port number
Transmitted Messages	Number of messages transmitted
Received Messages	Number of messages received
Sent Errors	Number of error messages sent

Show QR code for this page

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information

Legal Information

Change your cookie settings