Redundancy-RSTP

Description

The REDUNDANCY-RSTP page allows you to set the RSTP bridge and RSTP port details.

The users with Installer or Engineer roles can change the Redundancy-RSTP settings.

For REDUNDANCY-RSTP settings, after clicking Apply Changes, a dialog is displayed for confirmation to restart the interface to apply the new settings:

Click Yes to restart the IFE interface and apply the setting changes.
Click No to cancel the setting modifications and return to the last saved settings.

Navigation to the Redundancy-RSTP Page

To view the REDUNDANCY-RSTP page, click SETTINGS > COMMUNICATION > REDUNDANCY-RSTP.

RSTP Settings

Setting	Description
Enable	Allows you to enable RSTP feature (disabled by default).

RSTP Bridge Settings

Setting	Description	Value
Bridge Priority	Allows you to select bridge priority.	Setting range: 0-61440 Default setting: 32768
Bridge Hello Time	Allows you to enter bridge hello time.	Setting range: 1-2 s Default setting: 2 s
Bridge Max Age Time	Allows you to enter bridge maximum age time.	Setting range: 6-40 s Default setting: 40 s
Transmit Hold Count	Allows you to enter the transmit hold count.	Setting range: 3-100 s Default setting: 6 s
Bridge Forward Delay	Allows you to enter bridge forward delay.	Setting range: 4-30 s Default setting: 21 s

RSTP Port 1 and 2 Settings

Settings	Description	Value
RSTP setting mode	Allows you to select the RSTP setting mode: Select Automatic (default setting) to set RSTP port 1 and 2 automatically. Select Manual to set manually the RSTP port 1 and 2 parameters (port priority and port cost).	–
Port 1 and 2 Priority	Allows you to select manually port 1 and 2 priority.	Setting range: 0-240 Default setting: 128
Port 1 and 2 Cost	Allows you to enter manually the port 1 and 2 cost.	Setting range: 1-200000000

Settings

Description

Value

RSTP setting mode

Allows you to select the RSTP setting mode:

Select Automatic (default setting) to set RSTP port 1 and 2 automatically.
Select Manual to set manually the RSTP port 1 and 2 parameters (port priority and port cost).

–

Port 1 and 2 Priority

Allows you to select manually port 1 and 2 priority.

Setting range: 0-240
Default setting: 128

Port 1 and 2 Cost

Allows you to enter manually the port 1 and 2 cost.

Setting range: 1-200000000