ELKO One – Matter Thermostat 16 A

The ELKO One – Matter Thermostat 16 A (hereinafter referred to as the thermostat) will provide you with a simple, easy to use product to control your heating system and save energy. Covering different heating applications the thermostat is compatible with electric underfloor heating or electric radiators, but it could also be used to control mains-powered motorized valves or circulating pumps for water-based heating.

Refer to the installation instruction supplied with this product.

Thermostat can be configured in two installer levels according to room heating requirement.

You can configure LED brightness, sensor calibration, set point limit, and other end user setting.

The thermostat can be commissioned with any Matter compatible smart home system and their respective controllers/hubs for seamless user experience.

The room temperature can be increased/decreased manually by pressing the touch button on the thermostat.

Setback schedule refers to a schedule programmed directly into a thermostat, independent of any external system or network. This allows the thermostat to operate based on the set schedule without requiring input from other devices or control systems.

The child lock feature is designed to prevent children from accessing or inadvertently operating the thermostat. When enabled, users cannot make adjustments to the temperature or other settings on the thermostat..

When thermostat is not in use, you can turn on/off the device manually.

Matter Over The Air (OTA) allows user to receive firmware updates.

You can manually reset the thermostat to reset user data or ex-factory for complete factory reset.