Select a Product in a Role Card
To select the adequate product, click configure in the card. A new window opens which proposes three options:
-
Select a product category in the proposed catalogue with steps:
-
Select a product category.
-
Select a range.
-
Select the required set of characteristics in the range; the red figure on the top right of the page turns green when completed.
-
Get the reference or list of references; the product data sheet is accessible for each reference.
-
Validate to have all the selected product references in the role card.
-
-
Select with a product reference:
-
Type the reference number of the main product, not valid for auxiliaries and accessories.
-
Select the product from the proposed list.
If the reference number does not match with the concerned role card, eDesign indicates the possible role card(s) matching to this reference number.
-
-
Select one of the favorite products defined for this role card (Refer Create a Favorite Products or a Group of Favorites).
-
Select the favorite product from the list.
-
It is possible to modify the concerned product by clicking on the upper right corner of the card:
-
Reconfigure allows to modify the features of the product in the same range.
-
Remove product allows to change the product range.
The products associated with a PowerTag sensor are highlighted with a dedicated radio wireless link pictogram.
Click 
to undo any operation.
Click 
to redo any operation.