Front panel overview

A

Watt pulser: A set of LEDs (infrared, red) used for real energy pulsing.

B

VAR pulser: A set of LEDs (infrared, red) used for reactive energy pulsing.

C

Demand reset switch: Resets the peak demand values logged in the meter. Can be activated with the cover on or off.

D

Round button (ALT/ENTER): Press to select a highlighted option. Also used to toggle between NORM and ALT display modes. Press and hold to access Setup menu.

E

Navigation buttons: Press the up or down buttons to scroll and highlight a different menu item or to increase/decrease the value of a highlighted number. Press and hold the up button to move the cursor to the left. Press and hold the down button to move the cursor to the right.

F

Infrared optical port

G

Master reset button: Located in a recessed button under the front label to prevent accidental activation. You must remove the meter cover and its label to access it.

H

Test mode button: Located under the front cover, this places the meter into Test mode, ceasing accumulation of billable quantities.

I

Meter LCD screen