Masterpact MTZ1 工作条件
Masterpact MTZ 设备设计用于工业环境并经过了相关测试。建议将设备冷却或加热至适当的工作温度，并使其远离过度的振动和灰尘。
Show QR code for this page
Was this helpful?
The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for informational use only. No part of this guide may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide or its content, except for a non-exclusive and personal license to consult it on an "as is" basis. Schneider Electric products and equipment should be installed, operated, serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this material or consequences arising out of or resulting from the use of the information contained herein.
Schneider Electric、EverLink、Green Premium、I-Line、Masterpact、Micrologic、PowerPact 和 Square D 是 Schneider Electric SE、其子公司和附属公司的商标和财产。所有其他商标是其各自所有者的财产。
© 2018 – Schneider Electric