About the Document - Pact Series Cybersecurity Guide

Document Scope

This guide provides information on cybersecurity aspects for MasterPacT, ComPacT, and PowerPacT circuit breakers with MicroLogic trip units and control units to help system designers and operators promote and implement a secure operating environment for the product.

NOTE:

The information related to the new generation of ComPacT NS and PowerPacT P- and R-frame circuit breakers in this document also applies to the existing range ComPact NS and PowerPact P- and R-frame circuit breakers. Exceptions are mentioned wherever applicable.
The information related to the new generation of ComPacT NSX and PowerPacT H-, J-, and L-Frame circuit breakers in this document also applies to the existing range ComPact NSX and PowerPact H-, J-, and L-frame circuit breakers. Exceptions are mentioned wherever applicable.
These new ranges are based on the same technical and dimensional architecture as that of the existing range of circuit breakers.

This guide does not address the more general topic of how to secure your operational technology network, or your enterprise Ethernet network. For a general introduction to cybersecurity threats and how to address them, refer to How Can I Reduce Vulnerability to Cyber Attacks?.

NOTE: In this guide, the term security is used to refer to cybersecurity.

Validity Note

Information in this guide is relevant for the following circuit breakers:

MasterPacT MTZ circuit breakers with MicroLogic X control units
MasterPacT MTZ circuit breakers with MicroLogic Active control units
MasterPacT NT/NW circuit breakers with MicroLogic trip units
ComPacT NS circuit breakers with MicroLogic trip units
PowerPacT P- and R-Frame circuit breakers with MicroLogic trip units
ComPacT NSX circuit breakers with MicroLogic trip units
PowerPacT H-, J-, and L-Frame circuit breakers with MicroLogic trip units

NOTE: The information in this guide is also relevant for the legacy ComPact and PowerPact ranges.

Online Information

The characteristics of the products described in this document are intended to match the characteristics that are available on www.se.com. As part of our corporate strategy for constant improvement, we may revise the content over time to enhance clarity and accuracy. If you see a difference between the characteristics in this document and the characteristics on www.se.com, consider www.se.com to contain the latest information.

General Cybersecurity Information

In recent years, the growing number of networked machines and production plants has seen a corresponding increase in the potential for cyber threats, such as unauthorized access, data breaches, and operational disruptions. You must, therefore, consider all possible cybersecurity measures to help protect assets and systems against such threats.

To help keep your Schneider Electric products secure and protected, it is in your best interest to implement the cybersecurity best practices as described in the Cybersecurity Best Practices document.

Schneider Electric provides additional information and assistance:

Subscribe to the Schneider Electric security newsletter.
Visit the Cybersecurity Support Portal web page to:
- Find Security Notifications.
- Report vulnerabilities and incidents.
Visit the Schneider Electric Cybersecurity and Data Protection Posture web page to:
- Access the cybersecurity posture.
- Learn more about cybersecurity in the cybersecurity academy.
- Explore the cybersecurity services from Schneider Electric.

Product Related Cybersecurity Information

WARNING
POTENTIAL COMPROMISE OF SYSTEM AVAILABILITY, INTEGRITY, AND CONFIDENTIALITY Change default passwords and PIN codes at first use to help prevent unauthorized access to device settings, controls, and information. Disable unused ports/services and default accounts to help minimize pathways for malicious attackers. Place networked devices behind multiple layers of cyber defenses (such as firewalls, network segmentation, and network intrusion detection and protection). Use cybersecurity best practices (for example, least privilege, separation of duties) to help prevent unauthorized exposure, loss, modification of data and logs, or interruption of services. Failure to follow these instructions can result in death, serious injury, or equipment damage.

WARNING

POTENTIAL COMPROMISE OF SYSTEM AVAILABILITY, INTEGRITY, AND CONFIDENTIALITY

Change default passwords and PIN codes at first use to help prevent unauthorized access to device settings, controls, and information.
Disable unused ports/services and default accounts to help minimize pathways for malicious attackers.
Place networked devices behind multiple layers of cyber defenses (such as firewalls, network segmentation, and network intrusion detection and protection).
Use cybersecurity best practices (for example, least privilege, separation of duties) to help prevent unauthorized exposure, loss, modification of data and logs, or interruption of services.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

Environmental Data

For product compliance and environmental information, refer to the Schneider Electric Environmental Data Program.

Available Languages of the Document

The document is available in these languages:

English (DOCA0122EN), original language
Spanish (DOCA0122ES)
French (DOCA0122FR)
Chinese (DOCA0122ZH)

Related Documents for IEC Devices

Title of Documentation	Reference Number
MasterPacT MTZ - MicroLogic X Control Unit - User Guide	DOCA0102EN DOCA0102ES DOCA0102FR DOCA0102ZH
MasterPacT MTZ - MicroLogic Active Control Unit - User Guide	DOCA0265EN DOCA0265ES DOCA0265ZH
ComPacT NSX – Micrologic 5/6/7 Electronic Trip Units - User Guide	DOCA0188EN DOCA0188ES DOCA0188FR DOCA0188ZH
ComPact NSX – Micrologic 5/6/7 Electronic Trip Units - User Guide	DOCA0141EN DOCA0141ES DOCA0141FR DOCA0141ZH
MasterPacT NT/NW - MicroLogic A and E Trip Units - User Guide	04443724AA (EN) EAV16735 (ES) 04443723AA (FR)
MasterPacT NT/NW - MicroLogic P Trip Units - User Guide	04443726AA (EN) EAV16736 (ES) 04443725AA (FR)
MasterPacT NT/NW - MicroLogic H Trip Units - User Guide	04443728AA (EN) EAV16737 (ES) 04443727AA (FR)
ComPacT NS - MicroLogic A/E Trip Units - User Guide	DOCA0218EN DOCA0218ES DOCA0218FR DOCA0218ZH
ComPacT NS - MicroLogic P Trip Units - User Guide	DOCA0219EN DOCA0219ES DOCA0219FR DOCA0219ZH
Enerlin’X EIFE - Embedded Ethernet Interface for One MasterPacT MTZ Drawout Circuit Breaker - User Guide	DOCA0106EN DOCA0106ES DOCA0106FR DOCA0106ZH
Enerlin’X IFE - Ethernet Switchboard Server - User Guide	DOCA0084EN DOCA0084ES DOCA0084FR DOCA0084ZH
Enerlin’X IFE - Ethernet Interface for One Circuit Breaker - User Guide	DOCA0142EN DOCA0142ES DOCA0142FR DOCA0142ZH
How Can I Reduce Vulnerability to Cyber Attacks?	Cybersecurity System Technical Note
MicroLogic Trip Units and Control Units - Firmware History	DOCA0155EN
MasterPacT MTZ - MicroLogic X Control Unit - Firmware Release Notes	DOCA0144EN
MasterPacT MTZ - MicroLogic Active Control Unit - Firmware Release Notes	DOCA0267EN
Enerlin’X IFM - Modbus-SL Interface for One Circuit Breaker (TRV00210/STRV00210) - Firmware Release Notes	DOCA0145EN
Enerlin'X IFM - Modbus-SL Interface for One Circuit Breaker (LV434000) - Firmware Release Notes	DOCA0146EN
Enerlin'X IFE/EIFE Ethernet Interface - Firmware Release Notes	DOCA0147EN
Enerlin’X IFE Switchboard Server - Firmware Release Notes	DOCA0148EN
Enerlin'X IO Input/Output Application Module for One Circuit Breaker - Firmware Release Notes	DOCA0149EN
Enerlin’X FDM121 - Firmware Release Notes	DOCA0150EN
Enerlin’X FDM128 - Ethernet Display for Eight Devices - Firmware Release Notes	DOCA0151EN
BCM ULP - Firmware Release Notes	DOCA0152EN
ComPacT NSX / PowerPacT H-, J-, and L-Frame MicroLogic 5/6 - Firmware Release Notes	DOCA0153EN
ComPacT NSX - MicroLogic 7 Trip Unit - Firmware Release Notes	DOCA0154EN
ComPacT NSX BSCM Modbus SL/ULP Module - Firmware Release Notes	DOCA0329EN
Breaker Communication and Isolation Module (BCIM) for MicroLogic Active Control Unit - Firmware Release Notes	DOCA0395EN
EcoStruxure Cybersecurity Admin Expert User Guide	CAE_EN_UM_B4.1
EcoStruxure Panel Server - User Guide	DOCA0172EN DOCA0172ES DOCA0172FR DOCA0172DE DOCA0172IT DOCA0172PT

You can download these technical publications and other technical information from our website at www.se.com/ww/en/download/.

Related Documents for UL/ANSI Devices

Title of Documentation	Reference Number
MasterPacT MTZ - MicroLogic X Control Unit - User Guide	DOCA0102EN DOCA0102ES DOCA0102FR DOCA0102ZH
PowerPacT H-, J-, and L-Frame - MicroLogic 5 and 6 Trip Units - User Guide	48940-312-01 (EN, ES, FR)
MasterPacT NT/NW - MicroLogic A Trip Units - User Guide	48049-136-05 (EN, ES, FR)
MasterPacT NT/NW - MicroLogic P Trip Units - User Guide	48049-137-05 (EN)
MasterPacT NT/NW - MicroLogic H Trip Units - User Guide	48049-330-03 (EN, ES, FR)
Enerlin’X EIFE - Embedded Ethernet Interface for One MasterPacT MTZ Drawout Circuit Breaker - User Guide	DOCA0106EN DOCA0106ES DOCA0106FR DOCA0106ZH
Enerlin’X IFE - Ethernet Switchboard Server - User Guide	DOCA0084EN DOCA0084ES DOCA0084FR DOCA0084ZH
Enerlin’X IFE - Ethernet Interface for One Circuit Breaker - User Guide	DOCA0142EN DOCA0142ES DOCA0142FR DOCA0142ZH
How Can I Reduce Vulnerability to Cyber Attacks?	Cybersecurity System Technical Note
MicroLogic Trip Units and Control Units - Firmware History	DOCA0155EN
MasterPacT MTZ - MicroLogic X Control Unit - Firmware Release Notes	DOCA0144EN
Enerlin’X IFM - Modbus-SL Interface for One Circuit Breaker (TRV00210/STRV00210) - Firmware Release Notes	DOCA0145EN
Enerlin'X IFM - Modbus-SL Interface for One Circuit Breaker (LV434000) - Firmware Release Notes	DOCA0146EN
Enerlin'X IFE/EIFE Ethernet Interface - Firmware Release Notes	DOCA0147EN
Enerlin’X IFE Switchboard Server - Firmware Release Notes	DOCA0148EN
Enerlin'X IO Input/Output Application Module for One Circuit Breaker - Firmware Release Notes	DOCA0149EN
Enerlin’X FDM121 - Firmware Release Notes	DOCA0150EN
Enerlin’X FDM128 - Ethernet Display for Eight Devices - Firmware Release Notes	DOCA0151EN
BCM ULP - Firmware Release Notes	DOCA0152EN
ComPacT NSX / PowerPacT H-, J-, and L-Frame MicroLogic 5/6 - Firmware Release Notes	DOCA0153EN
ComPacT NSX BSCM Modbus SL/ULP Module - Firmware Release Notes	DOCA0329EN
EcoStruxure Cybersecurity Admin Expert User Guide	CAE_EN_UM_B4.1
EcoStruxure Panel Server - User Guide	DOCA0172EN DOCA0172ES DOCA0172FR DOCA0172DE DOCA0172IT DOCA0172PT

You can download these technical publications and other technical information from our website at www.se.com/us/en/download/.

Information on Non-Inclusive or Insensitive Terminology

As a responsible, inclusive company, Schneider Electric is constantly updating its communications and products that contain non-inclusive or insensitive terminology. However, despite these efforts, our content may still contain terms that are deemed inappropriate by some customers.

Trademarks

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.