0614CT1701

Ecoreach Software Operations

Screen: Device Homepage

The user can connect to the device from the device home page and do the settings configuration, do a device check up, view maintenance information, upgrade the device with the latest firmware & install/uninstall digital modules.

Screen: General View

Through the welcome screen, a user can create a project, have access to devices and discover them.

The welcome screen allows the user to open reports to have view of his projects, to modify them, to check if they are synchronized with the cloud and if they are shared with EcoStrucxure Facility expert.

The user can change the language and have access to the help files and to device firmware baseline file.

Screen: Protections

Once the user clicks on configuration, this screen appears, through which the user can read/ write different settings and check the settings discrepancies.

The user can change the language and have access to the help files and to device firmware baseline file.

Screen: Measures

Once the user clicks on Device Checkup section from the device home page, this screen appears and the user can view the measurement parameters, IO status , Alarms logs, maintenance parameters etc.

Screen: Digital Modules

Once the user clicks on Digital modules, this screen appears and the user can buy the desired digital module specific to the device & install the digital module to the device.

Once the user clicks on configuration, this screen appears, through which the user can read/ write different settings and check the settings discrepancies.

Screen: Firmware Upgrades

Through the Firmware Upgrade screen, a user can check the compatibility of the firmware versions of the devices and modules connected and upgrade them when needed with the device firmware baseline file.

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?