PowerLogic™ PM5300 series – User manual

Safety precautions
Meter overview
- Features and options
- Data display and analysis tools
- Meter configuration
Hardware reference
- Supplemental information
- Meter description
- Panel-mount meter mounting and wiring recommendations
- Meter wiring considerations
- Communications connections
  - RS-485 wiring
  - Ethernet communications connections
Display
- Display overview
- Default data display screen
- Notification icons
- Meter display language
- Meter screen navigation
- Data display screens
- HMI setup screens
  - Setting up the display
Basic setup
- Configuring basic setup parameters using the display
- Configuring advanced setup parameters using the display
- Setting up regional settings
- Setting up the screen passwords
  - Lost user access
- Setting the clock using the display
Cybersecurity
- Cybersecurity overview
- Product defense-in-depth
  - Device security capabilities
  - Protected environment assumptions
  - Potential risks and compensating controls
- Default security settings
- Display passwords
- Harden the device
  - Enabling/Disabling communication protocols
- Firmware upgrades
- Secure disposal guidelines
  - Secure disposal checklist
  - Disposal, reuse, recycling
Communications
- Recommended network communication metrics
- Serial communications
- Ethernet communications
  - Ethernet configuration
  - Ethernet port setup
  - Setting up Ethernet communications using the display
- BACnet/IP
Logging
- Data log
  - Setting up the data log
  - Saving the data log contents using ION Setup
- Alarm log
  - Alarm log storage
- Memory allocation for log files
Inputs / outputs
- Available I/O ports
- Status input applications
- Digital output applications
- Relay output applications
  - Configuring relay outputs using the display
  - Configuring relay outputs using ION Setup
- Energy pulsing
  - Configuring the alarm / energy pulsing LED using the display
  - Configuring the alarm / energy pulsing LED or digital output for energy pulsing using ION Setup
Alarms
- Alarms overview
- Available alarms
- Unary alarms
  - Available unary alarms
- Digital alarms
  - Available digital alarms
- Standard alarms
- Alarm priorities
- Alarm setup overview
  - Setting up alarms using the display
  - Setting up alarms using ION Setup
  - Unary alarm setup parameters
  - Digital alarm setup parameters
  - Standard (1-Sec) alarm setup parameters
- LED alarm indicator
  - Configuring the LED for alarms using the display
  - Configuring the LED for alarms using ION Setup
- Alarm display and notification
- Active alarms list and alarm history log
Measurements
- Real-time readings
- Energy
  - Configuring the energy scaling using ION Setup
- Preset energy
  - Configuring the preset energy using ION Setup
- Min/max values
- Demand
- Power factor (PF)
- Timers
Resets
- Meter resets
  - Meter Initialization
- Performing global resets using the display
- Performing single resets using the display
Multi-tariffs
- Multi-tariff
  - Multi-tariff implementation
  - Active tariff control mode
- Command mode overview
- Time of day mode overview
- Input mode overview
  - Digital input assignment for input control mode
  - Configuring input mode tariffs using the display
Power quality
- Power quality measurements
- Harmonics overview
- Total harmonic distortion %
- Total demand distortion
- Harmonic content calculations
- THD% calculations
- thd calculations
- TDD calculations
- Viewing harmonics using the display
- Viewing TDD using the display
- Viewing THD/thd using the display
Maintenance
- Maintenance overview
- Power meter memory
- Firmware version, model and serial number
  - Firmware upgrades
  - Upgrading your meter using DLF3000
- Diagnostics information
- Control power (auxiliary power) interruption event
  - Acknowledging control power (auxiliary power) interruption event using the display
- Troubleshooting
  - LED indicators
  - Troubleshooting checks
- Technical assistance
Verifying accuracy
- Overview of meter accuracy
- Accuracy test requirements
  - Energy pulsing
- Meter settings for accuracy testing
- Verifying accuracy test
  - Required pulses calculation for accuracy verification testing
  - Total power calculation for accuracy verification testing
  - Percentage error calculation for accuracy verification testing
- Accuracy verification test points
- Energy pulsing considerations
- VT and CT considerations
- Total power limits
- Typical sources of test errors
MID/MIR compliance
- Protected setup parameters and functions
- Locking or unlocking the meter
- Setting up the lock password
Device specifications
China Standard Compliance

EAV15107-EN11

Viewing alarm history details using the display

The alarm history log keeps a record of active alarms and past alarms.

When an active alarm condition becomes false (alarm = OFF), the event is recorded in the alarm history log and alarm notification (alarm icon, alarm LED) is turned off.

Alarms are displayed sequentially in the order of their occurrence, regardless of priority. The alarm details show the date and time of the alarm event, the type of event (for example, dropout or unary), which phase the alarm condition was detected on, and the value that caused the alarm condition to turn ON or OFF.

NOTE: Alarm details are not available if the alarm priority is set to None.

Navigate to Alarm > Hist .
Select the alarm you want to view (the latest ones appear on top).
Press Detail.

NOTE: For unacknowledged high priority alarms, the Ack option appears on this screen. Press Ack to acknowledge the alarm, or return to the previous screen if you do not want to acknowledge the alarm.

Show QR code for this page

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information

Legal Information