Setting up the data log
You can select the items to record in the data log and
the frequency (logging interval) that you want those values updated
Use ION Setup to configure data logging.
| NOTICE |
|---|
|
Data Loss
Save the contents of the data log
before configuring it.
Failure to follow these instructions can result
in data loss.
|
- Start ION Setup and open your meter in setup screens mode (). See the ION Setup Help for instructions.
- Double-click Data Log #1.
- Set up the logging frequency and measurements/data to log.
-
Click Send to save the changes to
the meter.
Parameter
Values
Description
Status Enable, Disable Set this parameter to enable or disable data logging in the meter. Interval 15 minutes, 30 minutes, 60 minutes Select a time value to set the logging frequency. Channels Items available for logging can vary based on the meter type. Select an item to record from the “Available” column, then click the double-right arrow button to move the item to the “Selected” column.
To remove an item, select it from the “Selected” column then click the double-left arrow button.