PacT Series ComPacT NSX – Modbus Communication – User Guide

Safety Information
- Cybersecurity Safety Notice
About the Book
Modbus Communication with ComPacT NSX Circuit Breakers
Modbus Protocol with ComPacT NSX Circuit Breakers
Dataset
- Standard Dataset
- Legacy Dataset
MicroLogic 5, 6, and 7 Trip Unit Data for ComPacT NSX Circuit Breakers
- MicroLogic 5, 6, and 7 Trip Unit Registers
- MicroLogic 5, 6, and 7 Trip Unit Commands
BSCM Modbus SL/ULP Module Data for ComPacT NSX Circuit Breakers
- BSCM Modbus SL/ULP Module Registers
- BSCM Modbus SL/ULP Module Commands
BSCM Module Data for ComPacT NSX Circuit Breakers
- BSCM Module Registers
- BSCM Module Commands
  - List of BSCM Module Commands and Error Codes
  - Circuit Breaker Control Commands
  - Counter Commands
IO Module Data for ComPacT NSX Circuit Breakers
IFM Communication Interface Data for ComPacT NSX Circuit Breakers
- IFM Communication Interface Registers
  - IFM Communication Interface Identification
  - Modbus Network Parameters
- IFM Communication Interface Commands
  - List of IFM Communication Interface Commands
  - IFM Communication Interface Commands
IFE Communication Interface Data for ComPacT NSX Circuit Breakers
- IFE Communication Interface Registers
  - IFE/EIFE Interface Identification and Status Registers
  - IP Network Parameters
- IFE Communication Interface Commands
  - List of IFE/EIFE Interface Commands
  - IFE/EIFE Interface Generic Commands
Appendices
- Cross References to Modbus Registers for ComPacT NSX
  - Cross References to Modbus Registers

DOCA0213EN-02

List of IFE/EIFE Interface Commands

List of Commands for IFE/EIFE Interfaces

The following table lists the IFE/EIFE interface commands, their corresponding command codes and user profiles. Follow the command execution procedures accordingly.

Command	Command code	User profile
Get current time	768	No password required
Set absolute time	769	No password required
Write user application name	1032	No password required
Set validity duration of the data	41868	Administrator, Services, Engineer, or Operator

List of Specific Commands for EIFE Interface

The following table lists the EIFE interface commands, their corresponding command codes and user profiles. Follow the command execution procedures.

Command	Command code	User profile
Reset EIFE alarms	41099	Administrator or Operator
Preset cradle/drawer counters	41352	Administrator or Operator
Preset regrease timers	41353	Administrator or Operator
Get events	50560	No password required

Error Codes

Error codes generated by the IFE/EIFE interface are the generic error codes Result of the Command.

Show QR code for this page

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information

Legal Information

Change your cookie settings