DOCA0084EN-10

List of IFE Supported Device Types

IFE Server Supported Slave Devices

The following table gives the list of devices that can be connected as Modbus slaves on an IFM interface stacked to the IFE server. This list of supported devices was accurate at the time this document was published. Check www.se.com for updates.

Device Group

Device

MasterPact NT/NW, ComPact NS, and PowerPact P- and R-frame circuit breakers with MicroLogic trip units

MicroLogic A

MicroLogic E

MicroLogic P

MicroLogic H

MasterPact MTZ circuit breaker with MicroLogic control units

MicroLogic X

MicroLogic Xi

ComPacT NSX and PowerPacT H-, J-, and L-frame circuit breakers with MicroLogic trip units

ComPacT NSX - E

PowerPacT - E

ComPact NSX and PowerPact H-, J-, and L-frame circuit breakers with MicroLogic trip units

ComPact NSX - A

ComPact NSX - E

PowerPact - A

PowerPact - E

Insulation monitoring devices

Vigilohm IM20

Vigilohm IM20-H

Monitoring and protection relay

Vigirex RHU

Monitoring relay

Vigirex RMH

Power factor controller

Varlogic

Power meters

PM1200

PM3250

PM3255

PM5000

PM5100/PM5300

PM5350

PM5560

PM800

PM800 A-S1/A-S2

PM9C

Device Group

Device

Energy meters

EM3550

EM3555

EM6400

EM6430

EM6433

EM6434

EM6436

EM6436D

EM6438

EM6459

iEM3150

iEM3155

iEM3250

iEM3255

iEM3350

iEM3355

Non-communicating MasterPact NT/NW and ComPact NS circuit breakers and switch disconnectors

BCM-OF/SD

Non-communicating ComPacT NSX and PowerPacT H-, J-, and L-frame circuit breakers and switch disconnectors

BSCM-OF/SD

Others

Smartlink Modbus

Smartlink Ethernet

Smartlink SI B

Smartlink SI D

PowerTag energy sensors (iEM1520, iEM1521, iEM1522, iEM1540, iEM1541, and iEM1542)
IFE server reads PowerTag energy sensor configuration from Smartlink SI B and Smartlink SI D device.

BCPM A/E

BCPM B

BCPM C

QR code for this page

Was this helpful?