TeSys™ Deca GV Manual Starters and Protectors
Refer to Catalog MKTED210011EN and 8536CT1901
GV2P + LC1D Pre-Assembled Kits
|
GV2P10 with LC1D09 |
Simplify your life! These new pre-assembled kits come with a GV2P manual motor protector already connected to an LC1D contactor. Panel builders and end users can now save wiring time by purchasing the pre-assembled kits.
Pre-Assembled Kits
|
Components (includes GV2AF3) |
UL File E134347 |
Group Motor Rating |
Kit Part No.[1] |
|
|---|---|---|---|---|
|
With GV2GH7 or GV1G09 Line Side Adapter |
With GV1G09 Line Side Adapter and GV2G Busbar |
SCCR 480 V |
||
| GV2P02 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P02KD09 |
| GV2P03 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P03KD09 |
| GV2P04 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P04KD09 |
| GV2P05 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P05KD09 |
| GV2P06 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P06KD09 |
| GV2P07 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P07KD09 |
| GV2P08 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P08KD09 |
| GV2P10 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P10KD09 |
| GV2P14 + LC1D09G7 | 100 kA | 100 kA | 22 kA | GV2P14KD09 |
| GV2P16 + LC1D25G7 | 50 kA | 42 kA | 22 kA | GV2P16KD25 |
| GV2P20 + LC1D25G7 | 50 kA | 42 kA | 22 kA | GV2P20KD25 |
| GV2P21 + LC1D25G7 | 50 kA | 42 kA | 22 kA | GV2P21KD25 |
| GV2P22 + LC1D25G7 | 50 kA | 42 kA | 22 kA | GV2P22KD25 |
|
Coil Voltage Suffix |
|
|---|---|
| 120 Vac | G7 |
| 24 Vac | B7 |
| 24 Vdc Low Consumption | BL |
TeSys™ BV4 Motor Circuit Protection Selection
 |
Providing UL508 type D combination ratings in accordance to current NEC installation requirements, the TeSys BV4 motor circuit protector allows for compact motor protection in conjunction with both the TeSys and Square D™ NEMA product families for motor control. The BV4 is a magnetic only, UL489 Listed circuit protector rated up to 100kA short-circuit protect with adjustable instantaneous trip points and can be installed directly to a panel or standard DIN rail.
Motor Circuit Protectors must be applied per a listed combination motor controller rating as required by NEC and UL 508A. See UL.com/SCCR for combination ratings or contact local support for a tested combination appendix.
TeSys™ Deca GV2 Accessories and Enclosures
Mounting Accessories for GV2 + LC1 D09 to D38[2]
|
|
Mount GV Directly on Single DIN Rail |
Mount on Single DIN Rail (Using Mounting Hardware) |
Mount GV and LC1D Contactor on Independent DIN Rails |
Mount on 2 DIN Rails (Using Mounting Hardware) |
 |
  |
|||
| Electrical Interconnect | ||||
| Mounting Hardware | — | — |
Mounting Accessories for GV2[2]
|
Description |
Application |
Standard Pack[3] |
Catalog Number |
|---|---|---|---|
|
Adapter plate |
For screw mounting of GV2M |
10 |
|
|
7.5 mm compensation plate |
To allow mounting of GV2M and GV2P on a common bus bar |
10 |
GV2AF3/G2AF4 |
Bus Bar Accessories for GV2
|
Description |
Application |
Pitch |
Catalog Number |
|---|---|---|---|
| Incoming Terminal | Type E line spacer, for use with or without GV2G busbars | — | |
| Type E line spacer, not for use with or with GV2G busbars | — | ||
| Bottom Feed, for use with GV1L3 current limiter | — | ||
|
3-Pole, 63 A Bus Bar |
For feeding 2 GV2 starters |
45 |
|
|
54 |
|||
|
72 |
|||
|
For feeding 3 GV2 starters |
45 |
||
|
54 |
|||
|
For feeding 4 GV2 starters |
45 |
||
|
54 |
|||
|
72 |
|||
|
For feeding 5 GV2 starters |
54 |
||
| Protective Cover | To cover unused bus bar outlets | — |
GV2 Other Accessories
|
Description |
Application |
Standard Pack [3] |
Catalog Number |
|---|---|---|---|
|
Current limiter—GV2 |
Increases interrupt capacity when attached to GV2ME or GV2P |
1 |
|
|
Through-the-door operating mechanism kits |
NEMA 1, 12, Black with trip indication, for use with GV2P |
1 |
|
|
NEMA 1, 12, Red/Yellow with trip indication, for use with GV2P |
1 |
||
|
NEMA 3R, 4, 4X, Red/Yellow without trip indication, |
1 |
||
|
Angle bracket |
Operating mechanism support shaft for deep enclosures (≥ 250 mm), for use with GV2P |
1 |
|
|
Operating mechanism short shaft |
One-piece short shaft for installing operating mechanisms in shallow enclosures, for use with GV2P, GV3P and TeSys Ultra |
1 |
|
|
Laser tool |
Laser tool for installing through-the-door kits |
1 |
GV2 Enclosures
|
Description |
Listing |
Mounting |
Enclosure Rating |
Max. Side Mounting Aux. Contacts |
Catalog Number |
|
|---|---|---|---|---|---|---|
|
Left Side |
Right Side |
|||||
|
Enclosures for GV2ME with or without accessories |
CSA Listed. Not UL Listed. |
Surface mounting |
NEMA 1, IP41 |
1 |
1 |
|
|
NEMA 12/4, IP55 |
1 |
1 |
||||
|
Flush mounting |
NEMA 1, IP41 |
1 |
1 |
|||
|
NEMA 12/4, IP55 |
1 |
1 |
||||
|
Flush mounting, front face reduced |
NEMA 1, IP41 |
0 |
1 |
|||
|
NEMA 12/4, IP55 |
0 |
1 |
||||
GV2 Enclosures Accessories
|
Description |
Type |
Standard Pack [5] |
Catalog Number |
|
|---|---|---|---|---|
|
Padlocking device for GV2M (when padlocked, starter is automatically in Off position) |
— |
1 |
||
|
Mushroom
head stop push button |
Spring return |
1 |
||
|
Latching |
Turn to Release |
1 |
||
|
Latching / Padlockable Turn to Release |
1 |
|||
|
Sealing kit |
For enclosures GV2MC01 and GV2MP01 |
10 |
||
Voltage Trips
 GVAU116 |
Voltage Trips
|
Only one trip or fault signaling contact can be installed per GV2/GV3 device. |
||||
|---|---|---|---|---|
|
Description |
Characteristics |
Voltage |
Frequency |
Cat. No. [6] |
|
Voltage trips GV2 or GV3P |
Undervoltage or Shunt trip (external mounting, 1 block right side only) |
110–115 V |
60 Hz |
GVA●116 |
|
220–240 V |
60 Hz |
GVA●226 |
||
Voltage Trips–Technical Data (GV2AU, GV2AS)
|
Rated Voltage—660 Vac |
|||||
|---|---|---|---|---|---|
|
Model |
Inrush |
Sealed |
Pick-Up Voltage |
Drop-Out Voltage |
Operating Time [7] |
|
GVAU |
12 VA / 8 W |
3.5 VA / 1.1 W |
0.8—1.1 |
0.35—0.7 |
10—15 ms |
|
GVAS |
14 VA / 10.5 W |
5 VA / 1.6 W |
0.7—1.1 |
0.2—0.75 |
10—15 ms |
 GVAE11 |
Auxiliary Contact Blocks [8]
|
Description |
Mounting |
Max. No. of Blocks |
Contact Type |
Sold in lots of |
Cat. No. |
|---|---|---|---|---|---|
|
Instantaneous auxiliary contacts GV2 or GV3P |
1 |
N.O. or N.C. [11] |
1 |
||
|
N.O. + N.C. |
10 |
||||
|
N.O. + N.O. |
1 |
||||
|
Left Hand Side |
2 |
N.O. + N.C. |
1 |
||
|
N.O. + N.O. |
1 |
||||
|
Fault signaling contact + instantaneous auxiliary contact GV2 or GV3P |
Left Hand Side [12] |
1 |
N.O. (fault) + N.O. |
1 |
|
|
N.O. (fault) + N.C. |
1 |
||||
|
N.C. (fault) + N.O. |
1 |
||||
|
N.C. (fault) + N.C. |
1 |
||||
|
Short circuit signaling contact GV2 or GV3P |
Left Hand Side |
1 |
SPDT |
1 |
GV3G66 |
GV3P Accessories
|
Accessory |
Application / Use With |
Standard Pack |
Cat. No. |
|---|---|---|---|
|
Through-the-door operating mechanism kits |
NEMA 1, 12, Black with trip indication, for use with GV3P |
1 |
|
|
NEMA 1, 12, Red/Yellow, with trip indication, for use with GV3P |
1 |
||
|
NEMA 3R, 4, 4X Red/Yellow without trip indication, for use with GV3P |
1 |
||
|
Angle bracket |
Operating mechanism support shaft for deep enclosures (≥ 300 mm), for use with GV3P |
1 |
|
|
3-pole, 115 A busbar |
For feeding 2 GV3P starters, 64 mm pitch |
1 |
|
|
For feeding 3 GV3P starters, 64 mm pitch |
1 |
||
|
Incoming line spacer |
Line spacer for GV3P when used in UL 508 Type E applications. One spacer required on line side. |
1 |
|
|
IP 20 cover |
IP20 protective cover for ring tongue versions of GV3P and 3-pole TeSys™ Deca Everlink contactors. Two covers required for line and load side. |
1 |
|
|
Padlocking device |
For use with up to 4 padlocks (not supplied). Ø 6 mm shank maximum |
1 |
|
|
Operating mechanism short shaft |
One-piece short shaft for installing operating mechanisms in shallow enclosures, for use with GV2P, GV3P and TeSys Ultra |
1 |
|
|
Laser tool |
Laser tool for installing through-the-door kits |
1 |
|
|
S-shaped busbar |
For connecting GV3P starters and LC1D40A-65A contactors side by side without intrawiring |
1 |
Common Accessories for BV4, GV4, GV5 and GV6
| Common Accessories | BV4 Reference | GV4 Reference | GV5 Reference | GV6 Reference | |||
|---|---|---|---|---|---|---|---|
|
Auxiliary contacts OF or SD |
|||||||
| Open/Closed Status | |||||||
| Trip Alarm | — | — | — | — | |||
| Open/Closed Status — Low Level | — | — | |||||
|
Fault signalization modules |
|||||||
For GV4PB, SDx module mounts externally on the right side, and provides
pre-trip alarm and fault signalization
For GV5PB & GV6PB, SDx module mounts internally, and includesa pre-trip contact (400 ms prior to trip) that can be use to open the contactor, as well as a contact that indicates overload trip of the circuit-breaker. |
— |
LV429424 (1) |
LV429424 (1) |
||||
| Instantaneous voltage release | |||||||
| Undervoltage Release (Mn) | 24 V 50/60 Hz | ||||||
| 24 Vdc | — | — | — | — | |||
| 48 V 50/60 Hz–48 Vdc | |||||||
| 110–130 V 50/60 Hz–125 Vdc | |||||||
| 208–240 V 50/60 Hz | |||||||
| 277 V 60 Hz | — | — | |||||
| 380–415 V 50 Hz | |||||||
| 440–480 V 60 Hz | — | — | |||||
| 525–600 V 60 Hz | — | — | |||||
| Shunt Trip (Mx) | 24 V 50/60 Hz | ||||||
| 24 Vdc | — | — | — | — | |||
| 48 V 50/60 Hz–48 Vdc | |||||||
| 110–130 V 50/60 Hz–125 Vdc | |||||||
| 208–240 V 50/60 Hz | |||||||
| 277 V 60 Hz | — | — | — | — | |||
| 380–415 V 50 Hz–440–480 V 60 Hz | |||||||
| 525–600 V 60 Hz | — | — | |||||
|
Rotary handles |
|||||||
| Direct | With black handle on black font | ||||||
| With red handle on yellow font | |||||||
| Front extended IP54 | With black handle on black font |
GV7AP01 (2) |
LV432598 (2) |
||||
| With red handle on yellow font |
GV7AP02 (2) |
LV432600 (2) |
|||||
| Front extended IP65 | With red handle on yellow font | — | — | ||||
| Lateral | With black handle on black font | — | — | ||||
| With red handle on yellow font | — | — | |||||
| Open door shaft operator | — | — | |||||
| Laser alignment tool to aid in aligning hole on door with rotary mechanism | |||||||
Additional BV4 and GV4 Accessories
| Accessory | BV4 Reference | GV4 Reference |
|---|---|---|
|
Cabling Accessories |
||
| EverLink Connector (replacement) | LAD96565 | LAD96565 |
| Large Spacing Cover for EverLink Connector (replacement) | GV4G66 | — |
| Crimp Lug Connector + Screws | GV4LUG | GV4LUG |
| Transparent Terminal Shield for Crimped Lug Connector | LAD96590 | LAD96590 |
| Interphase Barriers | LV426920 | LV426920 |
| One Time Torque Limiters, Green—9 N.m (set of 6) | LV426990 | LV426990 |
| One Time Torque Limiters, Yellow—5 N.m (set of 6) | LV426992 | LV426992 |
|
Locking Accessories |
||
| Removable Toggle Locking Device for 1 to 3 Padlocks | 29370 | — |
| Bag of 6 Leads + 6 Sealing Accessories | LV429375 | — |
|
Programming Tools |
||
| Pocket Battery—Allows changes to settings on the GV4PB when not powered by the line voltage | — | LV434206 |
| GV4PB cord for USB Maintenance Interface | — | TRV00917 |
| EcoStruxure Power Commission app | — | Free download |
Additional GV5 and GV6 Accessories
| Accessory | GV5PB150.. Reference | GV5PB250.. Reference | GV6PB.. Reference | |
|---|---|---|---|---|
|
Cabling Accessories |
||||
| Mechanical lug kit (set of 3) | 14–10 AWG (2.5–6mm2 )—Al/Cu | — | — | |
| 14–2/0 AWG (2.5—70mm)—Cu | — | — | ||
| 4–4/0 AWG (25–95mm2 )—Al/Cu | — | — | ||
| 3/0–350 kcmil AWG (95–185mm2 )—Al/Cu | — | — | ||
| 1/0 AWG–300 kcmil (50–185mm2 )—Al/Cu | — | — | ||
| 2 AWG–500 kcmil (35–240mm2)—Al | — | — | ||
| 2 AWG–600 kcmil (35–300mm2)—Cu | ||||
| 2 AWG–600 kcmil (35–300mm2)—Cu | — | — | ||
| 2/0 AWG–500 kcmil (70–240 mm2)—Al/Cu | — | — | ||
| 2/0 AWG–500 kcmil (70–240mm2)—Cu | — | — | ||
| 3/0 AWG–500 kcmil (95–240)—Al/Cu | — | — | ||
| 3/0 AWG–500 kcmil (95–240)—Cu | — | — | ||
| Terminal Nut Insert kit/Bus Bar Connections | 1/4–20 Tap (set of 3) | — | ||
| M10 x 25 terminal screws and washers for one side (set of 4) | — | — | ||
| Terminal Shield | Short Terminal Shield | |||
| Medium Terminal Shield | — | — | ||
| Long Terminal Shield | — | — | ||
| Phase Barriers | Phase Barriers (set of 6) | |||
|
Locking & Other Accessories |
||||
| Door Lock | Removable Door lock (lock off only) | |||
| Fixed Door lock (on or off) | ||||
| Toggle Extension | Fixed (set of 5) | |||