Precautions

General Precautions

When devices are used for applications with technical safety requirements, the relevant instructions must be followed.

Failure to use Schneider Electric software or approved software with our hardware products may result in injury, damage, or improper operating results.

DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Turn off all power supplying this equipment before working on or inside equipment. Always use a properly rated voltage sensing device to confirm power is off. Failure to follow these instructions will result in death or serious injury.

WARNING
UNINTENDED OPERATION Do not use the software for critical control or protection applications where human or equipment safety relies on the operation of the control action. Do not use the software to control time-critical functions because communication delays can occur between the time a control is initiated and when that action is applied. Do not use the software to control remote equipment without securing it with an authorized access level, and without including a status object to provide feedback about the status of the control operation. Failure to follow these instructions can result in death, serious injury, or equipment damage.

WARNING

UNINTENDED OPERATION

Do not use the software for critical control or protection applications where human or equipment safety relies on the operation of the control action.
Do not use the software to control time-critical functions because communication delays can occur between the time a control is initiated and when that action is applied.
Do not use the software to control remote equipment without securing it with an authorized access level, and without including a status object to provide feedback about the status of the control operation.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

WARNING
INACCURATE DATA RESULTS Do not incorrectly configure the software, as this can lead to inaccurate reports and data results. Do not plan your maintenance or service actions solely on messages and information displayed by the software. Do not rely solely on data displayed in the software reports to determine if the system is functioning correctly or meeting all applicable standards and requirements. Do not use data displayed in the software as a substitute for proper workplace practices or equipment maintenance. Failure to follow these instructions can result in death, serious injury, or equipment damage.

WARNING

INACCURATE DATA RESULTS

Do not incorrectly configure the software, as this can lead to inaccurate reports and data results.
Do not plan your maintenance or service actions solely on messages and information displayed by the software.
Do not rely solely on data displayed in the software reports to determine if the system is functioning correctly or meeting all applicable standards and requirements.
Do not use data displayed in the software as a substitute for proper workplace practices or equipment maintenance.

Failure to follow these instructions can result in death, serious injury, or equipment damage.

Environmental Precautions

To take the measures to conserve the environment, it is recommended to follow the steps for the disposal of packages, products, or batteries:

Package Disposal

The following package disposal rules must follow:

The exceptions detailed in the First Additional Provision of Law 11/1997 on commercial or industrial packaging states that the final holder of the waste of used containers and packaging must deliver the waste to an authorized recuperator, recycler, or revalue in proper conditions for reuse.
The subsets of the system are recyclable products and cannot be treated as household or municipal waste at the end of its useful life.
To preserve the environment, manage the waste in accordance with the current environmental regulations and requirements in each country or community. For any assistance, consult the manufacturer.

Product Disposal

The following product disposal rules must follow:

The electrical-electronic device (AEE) is marked with the symbol of compliance with the European Directive 2012/19 / EU (WEEE) regarding used electrical and electronic equipment (waste electrical and electronic equipment WEEE, RD 110/2015).
The directive provides the general framework valid throughout the European Union for the removal and reuse of waste from EEE.
To dispose off the product and to ensure its proper management, follow the current local environmental legislation and regulations. In this way, it will contribute to environmental conservation.
The wheeled bin crossed out on the product, in the documentation or on its packaging, means that the electrical-electronic devices and batteries must be collected separately at the end of their life cycle.
According to the current local legislation and environmental regulations, before the deposit of the RAEE (waste generated from appliances, instruments and devices powered by electricity or batteries) in their collection facilities, the batteries must be removed and deposited separately from the rest of the RAEE for proper management.
Never dispose the product or its associated equipment with household waste.
The symbols marked on the product are valid in the European Union and in those places where separate collection systems are available.