About the Document
Document Scope
The objective of this document is to provide the field engineers and maintenance personnel with the technical information and procedure needed to configure and test Schneider Electric circuit breakers using the EcoStruxure™ Power Commission (EPC) software with Service Interface.
Validity Note
This document applies to Service Interface with firmware version 001.001.052 or later.
Online Information
The technical characteristics of the devices described in this guide also appear online. To access the information online, go to the Schneider Electric Country Website.
The information contained in this guide is likely to be updated at any time. Schneider Electric strongly recommends that you have the most recent and up-to-date version available on www.se.com/ww/en/download/.
General Cybersecurity Information
In recent years, the growing number of networked machines and production plants has seen a corresponding increase in the potential for cyber threats, such as unauthorized access, data breaches, and operational disruptions. You must, therefore, consider all possible cybersecurity measures to help protect assets and systems against such threats.
To help keep your Schneider Electric products secure and protected, it is in your best interest to implement the cybersecurity best practices as described in the Cybersecurity Best Practices document.
Schneider Electric provides additional information and assistance:
-
Subscribe to the Schneider Electric security newsletter.
-
Visit the Cybersecurity Support Portal web page to:
-
Find Security Notifications.
-
Report vulnerabilities and incidents.
-
-
Visit the Schneider Electric Cybersecurity and Data Protection Posture web page to:
-
Access the cybersecurity posture.
-
Learn more about cybersecurity in the cybersecurity academy.
-
Explore the cybersecurity services from Schneider Electric.
-
Related Documents for IEC Devices
The following table lists documents for IEC devices compatible with the Service Interface.
| Title of documentation | Reference number |
|---|---|
|
Service Interface - Instruction Sheet |
|
|
Service Interface - Firmware Release Notes |
|
|
MasterPacT NT - Circuit Breakers and Switch-Disconnectors from 630 to 1600 A - User Guide |
|
|
MasterPacT NW - Circuit Breakers and Switch-Disconnectors from 800 to 6300 A - User Guide |
|
|
MasterPacT NT/NW - Circuit Breakers and Switch-Disconnectors - Maintenance Guide |
|
|
MasterPacT NT/NW - Circuit Breakers and Switch-Disconnectors - Basic and Standard End-User Maintenance Procedures |
|
|
ComPacT NS - MicroLogic Trip Units - User Guide |
|
|
ComPacT NS - MicroLogic A/E Trip Units - User Guide |
|
|
ComPacT NS - MicroLogic P Trip Units - User Guide |
|
|
ComPacT NS - Circuit Breakers and Switch-Disconnectors - User Guide |
|
|
ComPacT NSX - Circuit Breakers and Switch-Disconnectors - User Guide |
|
|
ComPacT NSX - MicroLogic 5/6/7 Electronic Trip Units - User Guide |
|
|
ComPacT NSX - Modbus Communication - User Guide |
|
|
FDM121 Front Display Module for One Circuit Breaker - User Guide |
|
|
Enerlin’X IO Input/Output Application Module for One Circuit Breaker User Guide |
|
|
Energy Reduction Maintenance Setting (ERMS) System Installation and User Guide |
|
|
Alternate Maintenance Setting (AMS) Switch - Installation Instructions |
|
|
Maintenance Mode Switch (MMS) Installation Instructions |
|
|
EasyPacT MVS - User Manual |
You can download these technical publications and other technical information from our website at www.se.com/ww/en/download/.
Related Documents for UL/ANSI Devices
The following table lists documents for UL/ANSI devices compatible with the Service Interface.
| Title of documentation | Reference number |
|---|---|
|
Service Interface - Instruction Sheet |
|
|
Service Interface - Firmware Release Notes |
|
|
MasterPacT NT Low-Voltage Power/Insulated Case Circuit Breaker - Instruction Bulletin |
|
|
MasterPact NW Low-Voltage Power/Insulated Case Circuit Breaker - Instruction Bulletin |
|
|
PowerPacT R-Frame and NS1600b–NS3200 Circuit Breakers - Instruction Bulletin |
|
|
PowerPacT P-Frame and NS630b–NS1600 Circuit Breakers - Instruction Bulletin |
|
|
PowerPacT P-Frame Drawout Circuit Breakers - Instruction Bulletin |
|
|
PowerPacT H-, J-, and L-Frame Circuit Breakers with MicroLogic Trip Units - User Guide |
|
|
MicroLogic 5 and 6 Electronic Trip Units for PowerPacT H-, J-, and L-Frame Circuit Breakers - User Guide |
|
You can download these technical publications and other technical information from our website at www.se.com/ww/en/download/.
Information on Non-Inclusive or Insensitive Terminology
As a responsible, inclusive company, Schneider Electric is constantly updating its communications and products that contain non-inclusive or insensitive terminology. However, despite these efforts, our content may still contain terms that are deemed inappropriate by some customers.
Trademarks
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.