SeT Series MCSeT Digitally Native up to 24 kV Air-insulated Switchgear With EvoPacT HVX Vacuum Circuit Breaker – Installation Guide

Glossary

BQT6904400-01

Installing Busbars

Assemble the busbar connection while installing each cubicle.

NOTE: Retrieve the following components:

The main busbar in the cubicle packaging, and
The busbar shims and hardware bag in the cubicle packaging.

Access the busbars through the side access of the cubicle.

NOTE: It is also possible to reach the busbar from within the cubicle. Refer to Access to the Busbar Compartments, User Guide (BQT6904800).
Place the busbar between the two previously assembled cubicles.

NOTE: Repeat the above operations each time a switchboard cubicle is placed.
For standard torque values, refer to Standard Tightening Torques and comply with the specified torque values.

Center Cubicle – 12/17.5 kV

Figure 31
Tubular Busbar Arrangement of 1250 A for 1250 A Feeder with Tubular Droppers

1	Screw M12 x 65	4	Tubular dropper
2	Washer M12	5	Nut M12
3	Tubular busbar	6	Boot⁽¹⁾

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 32
Tubular Busbar Arrangement of 2000 A for 1250 A Feeder with Tubular Droppers

1	Screw M12 x 65	4	Tubular dropper
2	Washer M12	5	Nut M12
3	Tubular busbar	6	Boot⁽¹⁾

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 33
D Shape Busbar Arrangement of 2500 A for 1250 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 34
D Shape Busbar Arrangement of 4000 A for 1250 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 35
Tubular Busbar Arrangement of 2000 A for 2000 A Feeder with Tubular Droppers

1	Screw M12 x 65	4	Tubular dropper
2	Washer M12	5	Nut M12
3	Tubular busbar	6	Boot⁽¹⁾

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 36
D Shape Busbar Arrangement of 2500 A for 2000 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 37
D Shape Busbar Arrangement of 4000 A for 2000 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 38
D Shape Busbar Arrangement of 2500 A for 2500 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 39
D Shape Busbar Arrangement of 4000 A for 2500 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 40
D Shape Busbar Arrangement of 3150 A for 3150 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 41
D Shape Busbar Arrangement of 4000 A for 3150 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Figure 42
D Shape Busbar Arrangement of 4000 A for 4000 A Feeder with Tubular Droppers

1	Screw M12 x 65	5	Tubular dropper
2	Washer M12	6	Nut M12
3	D shape busbar	7	Boot⁽¹⁾
4	Spacer

⁽¹⁾ Boots are not required for 17.5 kV.

Center Cubicle – 24 kV

Figure 43
D Shape Busbar Arrangement of 2500 A for 2500 A Feeder

1	Nut M12	5	Bolt M12 x 60
2	Washer M12	6	Boot cover⁽¹⁾
3	Spacer	7	Boot
4	D shape busbar	8	Droppers

⁽¹⁾ Knock-out the D-shaped busbar entry section from the boot cover on site.

Figure 44
D Shape Busbar Arrangement of 2500 A for 1250 A Feeder

1	Nut M12	5	D shape busbar
2	Washer M12	6	Screw M12 x 55
3	Tubular dropper	7	Boot
4	Spacer

Figure 45
Flat Busbar Arrangement of 2500 A for 2500 A Feeder

1	Nut M12	5	Spacer
2	Washer M12	6	Screw M12 x 70
3	Flat busbar	7	Boot cover⁽¹⁾
4	Droppers	8	Boot

⁽¹⁾ Knock-out the flat busbar entry section from the boot cover on site.

Figure 46
Flat Busbar Arrangement of 2500 A for 1250 A Feeder with Tubular Droppers

1	Nut M12	5	Tubular dropper
2	Washer M12	6	Screw M12 x 70
3	Flat busbar	7	Boot
4	Spacer

Figure 47
Flat Busbar Arrangement of 2500 A for 1250 A Feeder with Flat Droppers

1	Nut M12	5	Flat dropper
2	Washer M12	6	Screw M12 x 60
3	Flat busbar	7	Boot cover⁽¹⁾
4	Spacer	8	Boot

⁽¹⁾ Knock-out the flat busbar entry section from the boot cover on site.

Figure 48
Flat Busbar Arrangement of 1250 A for 1250 A Feeder with Flat Droppers

1	Nut M12	5	Screw M12 x 55
2	Washer M12	6	Boot cover⁽¹⁾
3	Flat dropper	7	Boot
4	Flat busbar

⁽¹⁾ Knock-out the flat busbar entry section from the boot cover on site.

Figure 49
Tubular Busbar Arrangement of 1250 A for 1250 A Feeder with Tubular Droppers

1	Screw M12 x 55	4	Tubular dropper
2	Washer M12	5	Nut M12
3	Tubular busbar	6	Boot

Figure 50
Flat Busbar Arrangement of 1250 A for 1250 A Feeder with Tubular Droppers

1	Nut M12	5	Flat droppers
2	Washer M12	6	Screw M12 x 55
3	Tubular dropper	7	Boot
4	Spacer

End Cubicle

Figure 51
D Shape Busbar Arrangement of 2500 A for 2500 A Feeder

1	Nut M12	5	Bolt M12 x 60
2	Washer M12	6	Boot cover⁽¹⁾
3	Spacer	7	Boot
4	D shape busbar	8	Droppers

⁽¹⁾ Knock-out the D-shaped busbar entry section from the boot cover on site.

Figure 52
D Shape Busbar Arrangement of 2500 A for 1250 A Feeder

1	Nut M12	5	D shape busbar
2	Washer M12	6	Screw M12 x 55
3	Tubular dropper	7	Boot
4	Spacer

Figure 53
Flat Busbar Arrangement of 2500 A for 2500 A Feeder

1	Nut M12	5	Spacer
2	Washer M12	6	Screw M12 x 70
3	Flat busbar	7	Boot cover⁽¹⁾
4	Droppers	8	Boot

⁽¹⁾ Knock-out the flat busbar entry section from the boot cover on site.

Figure 54
Flat Busbar Arrangement of 2500 A for 1250 A Feeder with Tubular Droppers

1	Nut M12	5	Tubular dropper
2	Washer M12	6	Screw M12 x 70
3	Flat busbar	7	Boot
4	Spacer

Figure 55
Flat Busbar Arrangement of 2500 A for 1250 A Feeder with Flat Droppers

1	Nut M12	5	Flat dropper
2	Washer M12	6	Screw M12 x 60
3	Flat busbar	7	Boot cover⁽¹⁾
4	Spacer	8	Boot

⁽¹⁾ Knock-out the flat busbar entry section from the boot cover on site.

Figure 56
Flat Busbar Arrangement of 1250 A for 1250 A Feeder with Flat Droppers

1	Nut M12	5	Screw M12 x 55
2	Washer M12	6	Boot cover⁽¹⁾
3	Flat dropper	7	Boot
4	Flat busbar

⁽¹⁾ Knock-out the flat busbar entry section from the boot cover on site.

Figure 57
Tubular Busbar Arrangement of 1250 A for 1250 A Feeder with Tubular Droppers

1	Screw M12 x 55	4	Tubular dropper
2	Washer M12	5	Nut M12
3	Tubular busbar	6	Boot

Figure 58
Flat Busbar Arrangement of 1250 A for 1250 A Feeder with Tubular Droppers

1	Nut M12	5	Flat droppers
2	Washer M12	6	Screw M12 x 55
3	Tubular dropper	7	Boot
4	Spacer

BSC - BSR Cubicle

Figure 59
Tubular Busbar Arrangement of 1250 A for 1250 A BSC - BSR with Flat Droppers

1	Flat dropper	4	Nut M12
2	Tubular busbar	5	Screw M12 x 55
3	Washer M12	6	Boot

Figure 60
Flat Busbar Arrangement of 2500 A for 2500 A BSC - BSR with Flat Droppers

1	Droppers	5	Spacer
2	Flat busbar	6	Screw M12 x 70
3	Washer M12	7	Boot cover⁽¹⁾
4	Nut M12	8	Boot

⁽¹⁾ Knock-out the flat busbar entry section from the boot cover on site.

Show QR code for this page

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information

Legal Information

Change your cookie settings