7EN02-0443-00

Configuring the communication

  1. Press and hold and at the same time for 2 seconds.
  2. Use the or button to enter the meter Passcode (High) (Default is “0010”) and press .
  3. Use the button to scroll to Comm and press .
  4. Use the or button to scroll through the options and press to confirm the new setting.
  5. Press to save your changes to the meter.

    Setting

    Options

    Description

    N/W

    Bacnet

    • Enable
    • Disable

    Enable or disable the network settings.

    NOTE: The IP Address and Subnet are read-only.

    WebApp

    • Enable
    • Disable

    Modbus

    • Enable
    • Disable
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?