DIN Ethernet EM3570 series – User manual PDF
7EN02-0443-00

Viewing the meter diagnostics information

You can view the communication status, meter model number, firmware version, serial number and Modbus tester interface troubleshooting wizard using the Diagnostics screen.
  1. Click Tools > Diagnostics.
    The Device Diagnostics dialog box opens.
  2. Click the Communication tab to view the communication status of the meter.
  3. Click the General tab to view the product model number, firmware version, and serial number.
  4. Click the Troubleshooting tab to view the Modbus tester interface wizard.
    1. Select the Modbus Tester Interface and click Open.
      The Modbus Tester Interface dialog box opens with WARNING statements.
    2. Select the Read Device Identification (0x2B) from the drop down list for Modbus Request Type.
    3. Select the parameters from the drop down list for Device Identification Category.
    4. Click Send to view the firmware version, product code and vendor name.
    5. Click Exit to close the dialog.
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information
Legal Information
Privacy Policy
Change your cookie settings