7EN02-0443-00

Configuring the HMI parameters

  1. Press and hold and at the same time for 2 seconds.
  2. Use the button to scroll to HMI and press .
  3. Use the button to scroll through the settings and press .
  4. Use the or button to scroll through the options and press to confirm the new setting.
  5. Press to save your changes to the meter.

    Setting

    Options

    Description

    Mode

    DisplayStd

    • IEC
    • IEEE

    Select IEC or IEEE standard.

    FullScreen

    • Enable
    • Disable

    Enable or disable the full screen mode.

    AutoScroll

    Enable or disable the auto scroll mode.

    LCD

    Backlight

    1 to 7

    Increase or decrease the value to adjust the backlight settings.

    Contrast

    1 to 9

    Increase or decrease the value to adjust the contrast settings.

    Summry

    Line1

    • Vavg
    • Uavg
    • Iavg
    • In
    • Ptot
    • Qtot
    • Stot
    • PFtot
    • Freq
    • Pdmd
    • Sdmd

    Configure the Line1 parameters to display on summary page.

    Line2

    Configure the Line2 parameters to display on summary page.

    Line3

    Configure the Line3 parameters to display on summary page.

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?