7EN02-0443-00

Configuring the nominal frequency

  1. Press and hold and at the same time for 2 seconds.
  2. Use the or button to enter the meter Passcode (High) (Default is “0010”) and press .
  3. Use the button to scroll to Nom and press .
  4. Use the or button to scroll through the options and press to confirm the new setting.
  5. Press to save your changes to the meter.

    Setting

    Options

    Description

    Freq(Hz)

    • 50
    • 60

    Select the frequency of the electrical power system, in Hz.

    Order

    • A-B-C
    • C-B-A

    Select the order of the frequency.

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?