Configuring the input metering parameters

Configure the various input channels for the meter using the Input Metering screen.

Double-click on Input Metering.
Select a channel and click Edit to open its specific setup dialog.
(Optional) Type a name for Label.
Enter a value for Pulse Weight.

To assign or unassign an input:

Assign: Select a status input from the Available Inputs column and click the >> button to move the item to the Assigned Inputs column.
Unassign: Select the item from the Assigned Inputs column and click the << button.

Parameters	Options	Description
Channel 01 Channel 02	Label	–	If applicable, enter the channel name in the label field.
Pulse Weight	1 to 10000 (Default: 500)	Enter the value for pulse weight.
Available Inputs Status Input 1 Status Input 2	–	Add a status input from the available inputs column to the assigned inputs column. NOTE: When no status input is assigned, the system disables the status of channel 01 and channel 02. You need to enable the status input mode in the I/O Setup parameter to make the status input available.

Parameters

Options

Description

Channel 01

Channel 02

Label

–

If applicable, enter the channel name in the label field.

Pulse Weight

1 to 10000

(Default: 500)

Enter the value for pulse weight.

Available Inputs

Status Input 1
Status Input 2

–

Add a status input from the available inputs column to the assigned inputs column.

NOTE: When no status input is assigned, the system disables the status of channel 01 and channel 02. You need to enable the status input mode in the I/O Setup parameter to make the status input available.

Click OK, and then click Send to save your changes to the meter.

NOTE: When changes are not saved to the meter, the status bar on the bottom left screen shows Download Incomplete.