Device configuration
The default factory settings (as applicable based on your
model) are listed in the table below:
|
Menu |
Factory settings |
|---|---|
|
Wiring |
iEM3100 series: 3PH4W iEM3200 series: 3PH4W; 3 CTs on I1, I2, and I3; Direct-No VT iEM3300 series: 3PH4W |
|
CT Ratio |
Varies depending on meter model |
|
CT & VT Ratio |
Varies depending on meter model |
|
Frequency |
50 Hz |
|
Date |
1-Jan-2000 |
|
Time |
00:00:00 |
|
Multi Tariffs |
Disable |
|
Overload Alarm |
Disable |
|
Digital Output |
Disable |
|
Digital Input |
Input Status |
|
Pulse Output |
100 imp/kWh |
|
Communication |
Varies depending on protocol |
|
Com.Protection |
Enable |
|
Contrast |
5 |
|
Password |
0010 |