Verifying the TeSys island Configuration
Verify that all hardware is operating correctly and that all settings for the TeSys island , including the trip and protection notifications, have been configured.
Verify the Island Configuration
|
Step |
Action |
|
|---|---|---|
|
1 |
Visually inspect the bus coupler LEDs. |
|
|
2 |
Visually inspect the power module LEDs. |
|
|
3 |
Visually inspect the I/O and accessory module LEDs. |
|
|
4 |
In SoMove software, verify that the configuration settings for the TeSys Avatar match the intended settings. |
|