Terminal Shroud Preparation

Prepare the terminal shrouds for installation by cutting the unnecessary parts on the front cover and the back cover with a tool. The following tables provide information about the preparation required before installation of the terminal shrouds according to the contactor rating.

NOTE: When the terminal shrouds are installed on contactor with coupling bars, only the front cover must be prepared. The back cover is not necessary.

LC1G205-475C contactors

Power connection accessory	Front cover	Back cover
Bars	Nothing to cut	Nothing to cut.
Lugs	If lugs are connected at the front of the contactor terminals, cut the part from top.	If lugs are connected at the back of the contactor terminals, cut the part from bottom.
Contactor with cable memory connection blocks	Nothing to cut	Cut the part from middle.

Power connection accessory

Front cover

Back cover

Bars

Nothing to cut

Nothing to cut.

Lugs

If lugs are connected at the front of the contactor terminals, cut the part from top.

If lugs are connected at the back of the contactor terminals, cut the part from bottom.

Contactor with cable memory connection blocks

Nothing to cut

Cut the part from middle.

LC1G620C contactors without cable memory

Power connection accessory	Front cover	Back cover
Bars	If lugs are connected at the front of the contactor terminals, cut the part from top.	If lugs are connected at the back of the contactor terminals, cut the part from bottom.
Lugs	If lugs are connected at the front of the contactor terminals, cut the part from top.	If lugs are connected at the back of the contactor terminals, cut the part from bottom.

Power connection accessory

Front cover

Back cover

Bars

If lugs are connected at the front of the contactor terminals, cut the part from top.

If lugs are connected at the back of the contactor terminals, cut the part from bottom.

Lugs

If lugs are connected at the front of the contactor terminals, cut the part from top.

If lugs are connected at the back of the contactor terminals, cut the part from bottom.

LC1G620C contactors with cable memory

Power connection accessory

Front cover

Back cover

Bars

Lugs