About the Book
Document Scope
Use this guide to:
-
Familiarize yourself with the mechanical and electrical characteristics of the components of TransferPacTTM range of Automatic Transfer Switching Equipment (ATSE) and Remote Transfer Switching Equipment (RTSE).
-
Assemble and wire the ATSE and RTSE.
Validity Note
This user guide is valid for TransferPacT range of ATSE and RTSE configurations as mentioned below:
-
Five current rating ranges:
-
Frame 100: rated current 32-100 A
-
Frame 160: rated current 80-160 A
-
Frame 250: rated current 100-250 A
-
Frame 630: rated current 320-630 A
-
Frame 800: rated current 800 A
-
Frame 1A: rated current 800-1600 A
-
-
Number of poles
-
2P (available for frame 100 only)
-
3P
-
4P
-
The availability of some functions described in this guide depends on physical modules installed on the TransferPacT range of ATSE and RTSE.
Online Information
The information contained in this document is likely to be updated at any time. Schneider Electric strongly recommends that you have the most recent and up-to-date version available on www.se.com/ww/en/download.
The technical characteristics of the devices described in the present document also appear online. To access the information online, go to the Schneider Electric home page www.se.com.
The technical characteristics presented in this guide should be the same as those that appear online. If you see a difference between the information contained in this guide and online information, use the online information.
For product compliance with environmental directives such as RoHS, REACH, PEP, and EOLI, go to www.se.com/green-premium.
Related Documentation
|
Document title |
Document reference number |
|---|---|
|
TransferPacT Active Automatic and TransferPacT Automatic Transfer Switching Equipment Cybersecurity Guide |
DOCA0215EN |
|
TransferPacT Active Automatic 32-100 A / TransferPacT Automatic 32-100 A Transfer Switching Equipment Instruction Sheet |
JYT3049801 |
|
TransferPacT Active Automatic 80-160 A and TransferPacT Automatic 80-160 A Transfer Switching Equipment Instruction Sheet |
JYT3049901 |
|
TransferPacT Active Automatic 100-250 A / TransferPacT Automatic 200-250 A / TransferPacT Remote 160-250 A Transfer Switching Equipment Instruction Sheet |
GEX2525501 |
|
TransferPacT Active Automatic 320-630 A / TransferPacT Automatic 320-630 A / TransferPacT Remote 320-630 A Transfer Switching Equipment Instruction Sheet |
GEX2525601 |
|
TransferPacT Active Automatic 800 A / TransferPacT Automatic 800 A / TransferPacT Remote 800 A Transfer Switching Equipment Instruction Sheet |
BQT1751501 |
|
TransferPacT Active Automatic 800-1600 A Transfer Switching Equipment Instruction Sheet |
BQT7680301 |
Information on Non-Inclusive or Insensitive Terminology
As a responsible, inclusive company, Schneider Electric is constantly updating its communications and products that contain non-inclusive or insensitive terminology. However, despite these efforts, our content may still contain terms that are deemed inappropriate by some customers.
Trademarks
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.