Proxy
Presentation
It is necessary to configure proxy settings in the Panel Server when both the following conditions are met:
-
if you use the remote access or cloud connection, and
-
if your network administrator has implemented a proxy on your local network.
The proxy address and port number are provided by your network administrator.
Availability
This function is available on Panel Server Entry, Universal, and Advanced.
Setting the Parameters
Proxy is set on the Panel Server webpages, at .
Proxy Activation Settings
| Parameter | Description |
|---|---|
|
HTTP proxy |
Used to enable/disable the HTTP proxy (disabled by default). |
|
HTTPS proxy |
Used to enable/disable the HTTPS proxy (disabled by default). |
HTTP and HTTPS Proxy Settings
The following parameters are displayed only when the parameter HTTP proxy or HTTPS proxy is enabled.
| Parameter | Description |
|---|---|
|
Address |
Used to enter the IP address or domain name of the HTTP or HHTPS proxy server. IMPORTANT: Do not type prefix http:// or https://. |
|
Port |
Used to enter the HTTP or HHTPS port. |
|
Authentication |
Used to enable/disable if proxy authentication is required (disabled by default). |
|
Non-proxy hosts |
Used to enter the exceptions of hosts in a non-proxy host list. |