PowerLogic™ PM5500 / PM5600 / PM5700 series – User manual

Safety precautions
Meter overview
- Overview of meter features
- Your meter in an energy management system
- PM5500 / PM5600 / PM5700 meter models and accessories
- Features differentiation matrix for PM5500 / PM5600 / PM5700 series
- Data display and analysis tools
- Meter configuration
Hardware reference
- Supplemental information
- Meter description
- Removing the PM5563 from the DIN rail
- Meter wiring considerations
- Communications connections
  - RS-485 wiring
  - Ethernet communications connections
- Digital outputs
- Digital inputs
- Analog inputs
Display
- Display overview
- Default data display screen
- Notification icons
- Meter display language
  - Resetting the display language
- Meter screen navigation
- HMI setup screens
- Setting up the display
- Setting up the average voltage (Vavg) on the summary page using the display
Basic setup
- Configuring basic setup parameters using the display
- Configuring advanced setup parameters using the display
- Setting up regional settings
  - Resetting the display language
- Setting up the screen passcodes
- PM5RD device hardware version Ax/Bx support for PM5563 and PM5563RD meter models
- Configuring PM5563 meter for PM5RD device hardware version
- Configuring toroid settings for RCM using the display
Cybersecurity
- Cybersecurity overview
- Product defense-in-depth
- Data encryption
- Default settings
- User accounts and permissions
  - User account lockout policy
- Passwords/Passcodes
  - Default passwords/passcodes and user accounts
  - Changing passwords/passcodes
- Harden the device
  - Enabling/Disabling communication protocols and changing port numbers
- Reporting a security incident or vulnerability
- Firmware upgrades
- Secure disposal guidelines
  - Secure disposal checklist
  - Disposal, reuse, recycling
Webpages
- Webpages (Legacy)
- Webpages (New)
Communications
- Ethernet communications
  - Ethernet configuration
- Serial communications
  - RS-485 network configuration
- BACnet/IP
- EtherNet/IP
  - Cyclical Exchanges (Implicit Exchanges)
  - Messaging (Explicit Exchanges)
- DNP3
- Modbus Ethernet gateway
  - Ethernet gateway implementation
  - Ethernet gateway configuration
    - Configuring the meter as an Ethernet gateway using the webpages
    - Configuring the meter as an Ethernet gateway using ION Setup
- Modbus TCP/IP filtering
- Simple Network Management Protocol (SNMP)
- FTP
Time and timekeeping
- Setting the clock using the display
- Setting the meter’s clock manually using the webpages
- Configuring time and time synchronization using the webpages
Logging
- Data log
- Alarm log
- Maintenance log
Inputs / outputs
- I/O overview
- Digital input applications
- Input metering
- Digital output applications
- Energy pulsing
  - Configuring the alarm / energy pulsing LED using the display
  - Configuring the alarm / energy pulsing LED or digital output for energy pulsing using ION Setup
- Analog inputs
  - Configuring analog inputs using the display
    - Configurable units
Resets
- Meter resets
  - Meter Initialization
- Performing global resets using the display
- Performing single resets using the display
- Performing user account resets using the display
Alarms
- Alarms overview
- Alarm types
- Unary alarms
  - Available unary alarms
- Digital alarms
  - Available digital alarms
- Standard alarms
- Logic alarms
- Custom alarms
  - Custom alarm parameter list
- Disturbance (sag/swell) alarms
- Alarm priorities
- Alarm setup overview
- LED alarm indicator
  - Configuring the LED for alarms using the display
  - Configuring the LED for alarms using ION Setup
- Alarm display and notification
- Email on alarm
- Active alarms list and alarm history log
- Acknowledging high-priority alarms using the display
- Resetting alarms using ION Setup
Multi-tariffs
- Multi-tariff
- Multi-tariff implementation
- Command mode overview
- Time of day mode overview
  - Time of day mode tariff validity
  - Time of day tariff creation methods
- Input mode overview
  - Digital input assignment for input control mode
- Tariff setup
  - Configuring input mode tariffs using the display
Measurements
- Instantaneous measurements
- Residual current
- Energy measurements
  - Configuring the energy scaling using ION Setup
- Preset energy
  - Configuring the preset energy using ION Setup
- Min/max values
- Demand measurements
- Power and power factor
- Timers
Power quality
- Power quality measurements
- Harmonics overview
- Voltage crest factor
- K-factor
- Total harmonic distortion %
- Total demand distortion
- Harmonic content calculations
- THD% calculations
- thd calculations
- TDD calculations
- Viewing harmonics using the display
- Viewing TDD, K-factor and Crest factor data
- Viewing THD/thd using the display
- Waveform capture
  - Overview of waveform capture
    - COMTRADE
  - Configuring waveform capture using ION Setup
  - Configuring waveform capture using the display
  - Configuring sag/swell using ION Setup
  - Configuring sag/swell using the display
  - Monitoring waveform capture on meter’s webpages
    - Viewing waveform capture on meter’s webpages
Maintenance
- Maintenance overview
- Lost user access
- Diagnostics information
- Control power (auxiliary power) interruption event
  - Acknowledging control power (auxiliary power) interruption event using the display
- Wrench icon
- LED indicators
- Phasors
  - Phasor screens
- Meter memory
- Meter battery
- Firmware version, model and serial number
- Firmware upgrades
  - Firmware upgrade methods
    - Meter upgrade requirements for FTP server
    - Firmware upgrade using FTP server
    - Meter upgrade requirements for firmware upgrade tool
    - Firmware upgrade using firmware upgrade tool
    - Meter upgrade requirements for webpages
    - Firmware upgrade using webpages
- Technical assistance
Verifying accuracy
- Overview of meter accuracy
- Accuracy test requirements
  - Energy pulsing
- Meter settings for accuracy testing
- Verifying accuracy test
- Accuracy verification test points
- Energy pulsing considerations
- VT and CT considerations
- Example calculations
- Typical sources of test errors
Revenue
- Revenue metering overview
- Revenue metering components
- Revenue firmware security features
- Protected setup parameters and functions
- Revenue-locking summary
- Revenue locking
Device specifications
Restoration of temporarily disabled configuration settings in webpages
China Standard Compliance

HRB1684301-16

Diagnostics information

The meter provides you with diagnostics information to help with troubleshooting.

Navigate to Maint > Diag > Info to view the meter model, serial number, date of manufacture, firmware version (including OS - Operating System and RS - Reset System), language version, and OS CRC (Cyclic Redundancy Check). The OS CRC value is a number (Hexadecimal format) that identifies the uniqueness between different OS firmware versions.

Navigate to Maint > Diag > Meter to view details of the meter status.

Navigate to Maint > Diag > Cl Pwr to view the control power information.

Non-MID/MIR meter models: The Cl Pwr screen displays how many times the meter lost control power, and the date and time of its last occurrence.
MID/MIR meter models: The Cl Pwr screen displays the Number of Losses, the Last Power Up and the Last Power Down events with the timestamp.

Navigate to Maint > Diag > Phasor to view the graphical representation of the power system the meter is monitoring.

Navigate to Maint > Diag > Phasor > Polar to view the numeric magnitude and angles of all voltage and current phases.

You can access the meter’s maintenance log using the webpages.

Show QR code for this page

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information

Legal Information