PowerLogic™ PM5500 / PM5600 / PM5700 series – User manual PDF
HRB1684301-16

Adding user accounts for webpages

In addition to the two default user accounts, you can create up to 4 user accounts.

NOTE:

  • If the Username or Password credentials of the Administrator user account are lost, you can reset using another Administrator user account.

  • You can reset the webpage user account via meter HMI, if the Username or Password credentials of the Administrator user account are lost (Refer to Performing user account resets using the display).

  1. Click Settings > User Management > User Accounts .
  2. In the User Accounts section, click Add User.
    The Add User section opens.
  3. Enter the Username, Password details and assign the user a Role.
  4. Click Apply Changes to save your changes to the meter.

    Parameter

    Description

    Username

    Enter a name (1 to 15 characters) for a new user.

    NOTE: Username is case-sensitive and can contain special characters.

    Password

    Enter a password (8 to 16 characters) for a new user.

    NOTE: The password must contain between 8 and 16 characters with at least 1 number, 1 capital letter and 1 special character.

    Confirm Password

    Confirm the password.

    Role

    • Administrator

    • Guest

    Assign a role for the user.
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information
Legal Information