PowerLogic™ PM5500 / PM5600 / PM5700 series – User manual

Safety precautions
Meter overview
- Overview of meter features
- Your meter in an energy management system
- PM5500 / PM5600 / PM5700 meter models and accessories
- Features differentiation matrix for PM5500 / PM5600 / PM5700 series
- Data display and analysis tools
- Meter configuration
Hardware reference
- Supplemental information
- Meter description
- Removing the PM5563 from the DIN rail
- Meter wiring considerations
- Communications connections
  - RS-485 wiring
  - Ethernet communications connections
- Digital outputs
- Digital inputs
- Analog inputs
Display
- Display overview
- Default data display screen
- Notification icons
- Meter display language
  - Resetting the display language
- Meter screen navigation
- HMI setup screens
- Setting up the display
- Setting up the average voltage (Vavg) on the summary page using the display
Basic setup
- Configuring basic setup parameters using the display
- Configuring advanced setup parameters using the display
- Setting up regional settings
  - Resetting the display language
- Setting up the screen passcodes
- PM5RD device hardware version Ax/Bx support for PM5563 and PM5563RD meter models
- Configuring PM5563 meter for PM5RD device hardware version
- Configuring toroid settings for RCM using the display
Cybersecurity
- Cybersecurity overview
- Product defense-in-depth
  - Device security capabilities
  - Protected environment assumptions
  - Potential risks and compensating controls
- Data encryption
- Default settings
- User accounts and permissions
  - User account lockout policy
- Passwords/Passcodes
  - Default passwords/passcodes and user accounts
  - Changing passwords/passcodes
- Harden the device
  - Enabling/Disabling communication protocols and changing port numbers
- Reporting a security incident or vulnerability
- Firmware upgrades
- Secure disposal guidelines
  - Secure disposal checklist
  - Disposal, reuse, recycling
Webpages
- Webpages (Legacy)
- Webpages (New)
Communications
- Ethernet communications
  - Ethernet configuration
    - Ethernet port setup
    - Performing initial Ethernet configuration using the webpages
    - Setting up Ethernet communications using the display
    - Configuring basic Ethernet settings using the webpages
    - Configuring advanced Ethernet parameters using the webpages
    - Using a serial communications converter to set up RS-485
- Serial communications
  - RS-485 network configuration
- BACnet/IP
- EtherNet/IP
  - Cyclical Exchanges (Implicit Exchanges)
  - Messaging (Explicit Exchanges)
- DNP3
- Modbus Ethernet gateway
  - Ethernet gateway implementation
  - Ethernet gateway configuration
    - Configuring the meter as an Ethernet gateway using the webpages
    - Configuring the meter as an Ethernet gateway using ION Setup
- Modbus TCP/IP filtering
- Simple Network Management Protocol (SNMP)
- FTP
  - FTP file structure
  - FTP file permissions
  - FTP filename requirements
  - Enabling and disabling the FTP server using the display
  - Enabling and disabling the FTP server using the webpages
Time and timekeeping
- Setting the clock using the display
- Setting the meter’s clock manually using the webpages
- Configuring time and time synchronization using the webpages
Logging
- Data log
- Alarm log
- Maintenance log
Inputs / outputs
- I/O overview
- Digital input applications
- Input metering
- Digital output applications
- Energy pulsing
  - Configuring the alarm / energy pulsing LED using the display
  - Configuring the alarm / energy pulsing LED or digital output for energy pulsing using ION Setup
- Analog inputs
  - Configuring analog inputs using the display
    - Configurable units
Resets
- Meter resets
  - Meter initialization
- Performing global resets using the display
- Performing single resets using the display
- Performing user account resets using the display
Alarms
- Alarms overview
- Alarm types
- Unary alarms
  - Available unary alarms
- Digital alarms
  - Available digital alarms
- Standard alarms
  - Example of over and under setpoint (standard) alarm operation
  - Maximum allowable setpoint
  - Available standard alarms
  - Power factor (PF) alarms
  - Phase loss alarm
- Logic alarms
- Custom alarms
  - Custom alarm parameter list
- Disturbance (sag/swell) alarms
- Alarm priorities
- Alarm setup overview
- LED alarm indicator
  - Configuring the LED for alarms using the display
  - Configuring the LED for alarms using ION Setup
- Alarm display and notification
- Email on alarm
- Active alarms list and alarm history log
  - Viewing active alarm details using the display
  - Viewing alarm history details using the display
  - Viewing alarms counters using the display
- Acknowledging high-priority alarms using the display
- Resetting alarms using ION Setup
Multi-tariffs
- Multi-tariff
- Multi-tariff implementation
- Command mode overview
- Time-of-day mode overview
  - Time-of-day mode tariff validity
  - Time-of-day tariff creation methods
- Input mode overview
  - Digital input assignment for input control mode
- Tariff setup
  - Configuring input mode tariffs using the display
Measurements
- Instantaneous measurements
- Residual current
- Energy measurements
  - Configuring the energy scaling using ION Setup
- Preset energy
  - Configuring the preset energy using ION Setup
- Min/Max values
- Demand measurements
- Power and power factor
- Timers
Power quality
- Power quality measurements
- Harmonics overview
- Voltage crest factor
- K-factor
- Total harmonic distortion %
- Total demand distortion
- Harmonic content calculations
- THD% calculations
- thd calculations
- TDD calculations
- Viewing harmonics using the display
- Viewing TDD, K-factor and Crest factor data
- Viewing THD/thd using the display
- Waveform capture
  - Overview of waveform capture
    - COMTRADE
  - Configuring waveform capture using ION Setup
  - Configuring waveform capture using the display
  - Configuring sag/swell using ION Setup
  - Configuring sag/swell using the display
  - Monitoring waveform capture on meter’s webpages
    - Viewing waveform capture on meter’s webpages
Maintenance
- Maintenance overview
- Lost user access
- Diagnostics information
- Control power (auxiliary power) interruption event
  - Acknowledging control power (auxiliary power) interruption event using the display
- Wrench icon
- LED indicators
- Phasors
  - Phasor screens
- Meter memory
- Meter battery
- Firmware version, model and serial number
- Firmware upgrades
  - Firmware upgrade methods
- Technical assistance
Verifying accuracy
- Overview of meter accuracy
- Accuracy test requirements
  - Energy pulsing
- Meter settings for accuracy testing
- Verifying accuracy test
- Accuracy verification test points
- Energy pulsing considerations
- VT and CT considerations
- Example calculations
- Typical sources of test errors
Revenue
- Revenue metering overview
- Revenue metering components
- Revenue firmware security features
- Protected setup parameters and functions
- Revenue-locking summary
- Revenue locking
Device specifications
Restoration of temporarily disabled configuration settings in webpages
China Standard Compliance

HRB1684301-17

Revenue firmware security features

Your revenue-specific meter has additional firmware security features.

You cannot perform resets or configure some revenue-specific parameters on your meter while it is revenue-locked.

Revenue meters and firmware upgrades

Meter model

Upgrade information

PM5561 / PM5661 / PM5761

The OS CRC value is a number that identifies the uniqueness between different OS firmware versions.

You cannot upgrade a locked meter. In order to upgrade, you must:

Follow the unlocking / locking procedure to unlock the meter.
Perform the upgrade.
Follow the unlocking / locking procedure to lock the meter.

PM5562 / PM5562MC

You cannot upgrade a locked meter.

In order to upgrade, you must:

Remove the meter from service and unseal it.
Follow the unlocking / locking procedure to unlock the meter.
Perform the upgrade.
Follow the unlocking / locking procedure to lock the meter.
Re-seal and re-certify your meter with the appropriate revenue metering authorities.

NOTICE
LOSS OF COMPLIANCE Ensure that you re-certify your meter with the appropriate revenue metering authorities after re-enabling the hardware-based security. Failure to follow these instructions may render your device non-compliant for billing purposes.

Show QR code for this page

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?

Contact Information

Legal Information

Change your cookie settings