Performing user account resets using the display

If the Username or Password credentials for Administrator role account or for multiple Administrator role accounts are lost, you can reset user accounts and roles using the meter display.

NOTE: For PM5563 meter model without PM5RD remote display, you must buy PM5RD to perform this user account reset.
  1. Navigate to Maint > Resets .
  2. Move the cursor to point to User Acc Resets, then press Select.
  3. Press Reset.
  4. Enter the reset passcode (default is “0”), then press OK to reset the user accounts and roles to factory default settings.
  5. Press Yes to confirm the reset or No to cancel and return to the previous screen.
QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and other countries.

Was this helpful?