Setting up custom alarms using ION Setup
Use
ION Setup
to configure custom (Cust1s) alarms.
- Select the custom alarm you want to set up, then click Enable to display the available setup options.
- Use the dropdown list to select the parameter you want to set for your custom alarm.
- Use the Label box to define a name for your custom alarm.
-
Use the dropdown list to select the setpoint condition
you want to monitor:
- Over: Alarm condition occurs when the value goes above the pickup setpoint setting.
- Under: Alarm condition occurs when the value goes below the pickup setpoint setting.
- Over (absolute): Alarm condition occurs when the absolute value goes above the pickup setpoint setting.
- Under (absolute): Alarm condition occurs when the absolute value goes below the pickup setpoint setting.
- Configure the rest of the alarm setup parameters.
- Click OK then Send to save your changes to the meter